mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-26 21:26:46 +00:00

History

Ryan c12b997679 Tidy up `SLEEP_LED_ENABLE` rules (#15362 )		2021-12-01 21:13:00 +11:00
..
keymaps	[Keyboard] Add Studio Kestra Cascade PCB (#12704 )	2021-05-13 20:54:10 -07:00
cascade.c	[Keyboard] Add Studio Kestra Cascade PCB (#12704 )	2021-05-13 20:54:10 -07:00
cascade.h	[Keyboard] Add Studio Kestra Cascade PCB (#12704 )	2021-05-13 20:54:10 -07:00
config.h	[Keyboard] Add Studio Kestra Cascade PCB (#12704 )	2021-05-13 20:54:10 -07:00
info.json	Remove width, height and key_count from info.json (#14274 )	2021-09-12 14:04:56 +10:00
readme.md	[Keyboard] Add Studio Kestra Cascade PCB (#12704 )	2021-05-13 20:54:10 -07:00
rules.mk	Tidy up `SLEEP_LED_ENABLE` rules (#15362 )	2021-12-01 21:13:00 +11:00

Cascade

60% universal hotswap/solder PCB with USB-C that supports multiple commonly used layouts.

Keyboard Maintainer: Studio Kestra
Hardware Supported: Most GH60-style keyboards, more info at studiokestra.ca/cascade
Hardware Availability: RNDKBD.com

Bootload Sequence

There are 3 ways to put the board in bootloader mode:

Hold the top-left key (typically Esc) while plugging in the USB cable, OR
While the PCB is plugged into the PC, press the physical RESET button on the back of the board, OR
With the default layout, toggle Layer 1 and press the ESC key.

Make example for this keyboard (after setting up your build environment):

make studiokestra/cascade:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.