qmk_firmware/keyboards/handwired/splittest/promicro
Nick Brassel 2271da00bc
Move splittest I2C (#8346)
2020-03-09 15:36:40 +11:00
..
config.h Move splittest I2C (#8346) 2020-03-09 15:36:40 +11:00
readme.md [Keyboard] Refactor handwired/splittest to support multiple boards (#6373) 2019-07-20 13:35:30 -07:00
rules.mk Cleanup rules.mk for 32U4 keyboards, H (#7030) 2019-10-20 12:51:37 -07:00

readme.md

Pro Micro splittest

To trigger keypress, short together pins B3 and B6 (marked on the PCB as 14 and 10).

Wiring

  • Add switches to both Pro Micros across B3 and B6 pins
  • Add pull-up resistor to left side between VCC and F6
  • Add pull-down resistors to right side between GND and F6
  • Connect the following pins on both sides together: D0, D1, GND, VCC
  • Add I2C 4.7kOhm resistors between D0 and VCC, and D1 and VCC
  • Wire Di of RGB strip for each half to D3