mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-29 06:30:17 +00:00
44 lines
2.2 KiB
Markdown
Executable File
44 lines
2.2 KiB
Markdown
Executable File
# Acheron Elongate rev. Beta QMK firmware repository
|
|
|
|
|
|
|
|
* Keyboard Maintainer: [Gondolindrim](https://github.com/Gondolindrim)
|
|
* Hardware Supported: [open-source PCB](https://github.com/AcheronProject/Elongate) powered by STM32F072 microcontroller
|
|
* Hardware Availability: the revision beta of Elongate was never publicly sold.
|
|
|
|
## Introduction
|
|
|
|
This is the QMK firmware repository for the Elongate PCB revision Beta and pre-revision Beta versions, which was the initial revision PCB for this keyboard; hence it was never sold publicly.
|
|
|
|
The Elongate PCB is an Open-Hardware-guideline-compliant PCB which files can be found at [this repository](https://github.com/AcheronProject/Elongate). Its designer and maintainer is [Gondolindrim](https://github.com/Gondolindrim).
|
|
|
|
## How to flash
|
|
|
|
### Enter bootloader
|
|
|
|
The DFU state in the bootloader can be accessed in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: press the button on the front of the PCB.
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.
|
|
|
|
## Compile firmware
|
|
|
|
You can build the default layout firwmare for Elongate after setting up your build environment by using:
|
|
|
|
make acheron/elongate/beta:default
|
|
|
|
After entering DFU state in your PCB, you can download the binary file generated through `dfu-util` or a GUI like QMK Toolbox.
|
|
|
|
To directly flash the PCB after it is put into a DFU state, use
|
|
|
|
make acheron/elongate/beta:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## PCB Documentation
|
|
|
|
See the [AcheronDocs](https://acheronproject.com/pcbs/elongate/) page for the ElongatePCB full documentation. You can also check the KiCad PCB files at the [Elongate GitHub repository](https://github.com/AcheronProject/Elongate).
|
|
|
|
Before using the files for personal or commercial use, please read the [Acheron Open-Hardware License V1.4](https://acheronproject.com/AOHL14/) under which the Elongate PCB is published.
|