qmk_firmware/keyboards/buzzard
Ryan 8f6c228adb
Move `SOFT_SERIAL_PIN` to data driven (#19863)
2023-02-17 16:40:49 +11:00
..
keymaps [Core] Replace Tapping Force Hold feature with Quick Tap Term (#17007) 2022-12-12 16:52:22 +01:00
rev1 Move `SOFT_SERIAL_PIN` to data driven (#19863) 2023-02-17 16:40:49 +11:00
buzzard.c [Keyboard] Add Buzzard support (#15493) 2022-01-10 02:33:48 -08:00
buzzard.h [Keyboard] Add Buzzard support (#15493) 2022-01-10 02:33:48 -08:00
readme.md [Keyboard] Add Buzzard support (#15493) 2022-01-10 02:33:48 -08:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Buzzard

Buzzard Keyboard

Buzzard is a 40 keys ergonomic split keyboard. The layout is inspired by the Architeuthis dux with pinky, ring, index, and inner columns splayed at 15, 5, 0, -5, -5 degrees. However, it as two additional pinky keys and a modified thumb cluster.

Some Features:

  • Integrated TrackPoint reset circuit and two possible positions to mount a TrackPoint to the bottom of the PCB. Either between the two inner columns or between the index and middle finger columns
  • Mounting option for a linear actuator (HapticBuzz from pimoroni)
  • I2C interface for an OLED display
  • Wireless Ready (however, without TrackPoint / linear actuator support):
    • Battery switch / connector
    • Option to use a battery friendly Sharp memory display instead of an OLED display
  • Choc-spaced

Building the Firmware

Make example for this keyboard (after setting up your build environment):

qmk compile -kb buzzard -km  default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

A build guide for the Buzzard keyboard can be found at https://github.com/crehmann/Buzzard