mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-18 07:33:26 +00:00
0d222db31f
- watchdog is timed out before disabling it by mbed startup - old booloader disable watchdog while new(2015/01) doesn't
104 lines
4.0 KiB
Plaintext
104 lines
4.0 KiB
Plaintext
OpenOCD config files for Kinetis
|
|
================================
|
|
http://nemuisan.blog.bai.ne.jp/?eid=192848#OPENOCD
|
|
|
|
These are needed for debug and programing bootloader with SWD. To flash keyboard firmware use 'dfu-util'.
|
|
|
|
Flash security of Freescale kinetis
|
|
-----------------------------------
|
|
If FSEC of flash config is changed accidentally SWD/JTAG you can't get debug access until doing 'mdm mass_erase' with JTAG, CMSIS-DAP or OpenSAD adapter. HLA(high level adapter) like stlink doesn't work for this.
|
|
|
|
|
|
Example
|
|
-------
|
|
Debug:
|
|
$ openocd -s tool -f tool/openocd.cfg
|
|
$ arm-none-eabi-gdb build/infinity.elf -ex "target remote localhost:3333"
|
|
|
|
Flash bootloader:
|
|
$ openocd -s tool -f tool/openocd.cfg -c "mt_flash kiibohd_bootloader.bin"
|
|
|
|
|
|
Infinity SWD pinout
|
|
-------------------
|
|
SWD pins are placed next to reset button; SWD_CLK, SWD_DIO, GND, 5V from top.
|
|
Note that RESET is also needed to get full control with OpenOCD.
|
|
|
|
--------
|
|
| ___ o |CLK
|
|
||RST| o |DIO
|
|
||BTN| o |GND
|
|
| --- o |5V
|
|
--------
|
|
|
|
|
|
Kinetis sercure state
|
|
----------------------
|
|
openocd 0.9.0
|
|
|
|
Warn : *********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! **********
|
|
Warn : **** ****
|
|
Warn : **** Your Kinetis MCU is in secured state, which means that, ****
|
|
Warn : **** with exception for very basic communication, JTAG/SWD ****
|
|
Warn : **** interface will NOT work. In order to restore its ****
|
|
Warn : **** functionality please issue 'kinetis mdm mass_erase' ****
|
|
Warn : **** command, power cycle the MCU and restart OpenOCD. ****
|
|
Warn : **** ****
|
|
Warn : *********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! **********
|
|
|
|
|
|
Info : MDM: Chip is unsecured. Continuing.
|
|
target state: halted
|
|
target halted due to debug-request, current mode: Thread
|
|
xPSR: 0x01000000 pc: 0xfffffffe msp: 0xfffffffc
|
|
auto erase enabled
|
|
Info : Probing flash info for bank 0
|
|
Warn : flash configuration field erased, please reset the device
|
|
wrote 4096 bytes from file kiibohd_bootloader.bin in 2.442562s (1.638 KiB/s)
|
|
Info : MDM: Chip is unsecured. Continuing.
|
|
|
|
|
|
|
|
|
|
Open On-Chip Debugger 0.9.0-dev-00346-g3e1dfdc-dirty (2015-03-21-20:41)
|
|
Licensed under GNU GPL v2
|
|
For bug reports, read
|
|
http://openocd.sourceforge.net/doc/doxygen/bugs.html
|
|
Info : only one transport option; autoselect 'cmsis-dap'
|
|
Kinetis MUST need Hardware SRST Control to Recover Secure-State!
|
|
adapter_nsrst_delay: 200
|
|
srst_only separate srst_gates_jtag srst_open_drain connect_deassert_srst
|
|
Info : add flash_bank kinetis k20.pflash
|
|
cortex_m reset_config sysresetreq
|
|
adapter speed: 1000 kHz
|
|
srst_only separate srst_nogate srst_open_drain connect_assert_srst
|
|
Info : CMSIS-DAP: SWD Supported
|
|
Info : CMSIS-DAP: Interface Initialised (SWD)
|
|
Info : CMSIS-DAP: FW Version = 1.0
|
|
Info : SWCLK/TCK = 0 SWDIO/TMS = 1 TDI = 0 TDO = 0 nTRST = 0 nRESET = 1
|
|
Info : Connecting under reset
|
|
Info : DAP_SWJ Sequence (reset: 50+ '1' followed by 0)
|
|
Info : CMSIS-DAP: Interface ready
|
|
Info : clock speed 1000 kHz
|
|
Info : IDCODE 0x2ba01477
|
|
Warn : Adapter returned success despite SSTICKYERR being set.
|
|
Warn : Adapter returned success despite SSTICKYERR being set.
|
|
Warn : Adapter returned success despite SSTICKYERR being set.
|
|
Warn : Adapter returned success despite SSTICKYERR being set.
|
|
Info : k20.cpu: hardware has 6 breakpoints, 4 watchpoints
|
|
Info : MDM: Chip is unsecured. Continuing.
|
|
Info : MDM: Chip is unsecured. Continuing.
|
|
target state: halted
|
|
target halted due to debug-request, current mode: Thread
|
|
xPSR: 0x01000000 pc: 0xfffffffe msp: 0xfffffffc
|
|
auto erase enabled
|
|
Info : Probing flash info for bank 0
|
|
Warn : flash configuration field erased, please reset the device
|
|
wrote 4096 bytes from file kiibohd_bootloader.bin in 2.446902s (1.635 KiB/s)
|
|
Info : MDM: Chip is unsecured. Continuing.
|
|
Info : Halt timed out, wake up GDB.
|
|
Error: timed out while waiting for target halted
|
|
Runtime Error: tool/k20dx32_flash.cfg:81:
|
|
in procedure 'mt_flash'
|
|
in procedure 'halt' called at file "tool/k20dx32_flash.cfg", line 81
|