mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-13 05:11:01 +00:00
416af0171c
* Remove CORTEX_ENABLE_WFI_IDLE from the codebase. * Turn on CORTEX_ENABLE_WFI_IDLE by default. |
||
---|---|---|
.. | ||
fmh | ||
fms | ||
readme.md |
GeonWorks Frog Mini PCB firmware
The Frog Mini is a 60% keyboard designed by GeonWorks, with PCB by Gondolindrim.
Two PCB variants are offered: FM-S (solderable) and FM-H (hotswap with Kailh sockets).
- Keyboard Maintainer: Gondolindrim
- Hardware Availability: proprietary PCB sold by Geon.Works
- Website: GeonWorks
How to flash
Enter bootloader
Release Alpha:
The DFU state in the bootloader can be accessed in 2 ways:
- Bootmagic reset: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: press the button on the back of the PCB
- Keycode in layout: press the key mapped to
QK_BOOT
if it is available (ESC key at layer 1 in the default layout)
Release Beta:
The DFU state in the bootloader can be accessed in 3 ways:
- Bootmagic reset: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: press the button on the back of the PCB, for at least five seconds
- Keycode in layout: press the key mapped to
QK_BOOT
if it is available (ESC key at layer 1 in the default layout)
Compile firmware
FM-S (solderable)
After accessing the DFU state in your PCB, build the default layout using:
make geonworks/frogmini/fms:default
FM-H (hotswap)
After accessing the DFU state in your PCB, build the default layout using:
make geonworks/frogmini/fmh:default
Then download the resulting binary *bin
file using dfu-util
or QMK Toolbox.
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.