gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-22 09:33:28 +00:00
Code Issues Packages Projects Releases Wiki Activity
a55c838961
qmk_firmware/keyboards/crkbd/keymaps/like_jis/keymap.c
marksard 6076ed85be Keyboard: Partial refactor of the crkbd code (#3600) 
* Add display to LED-parameters function
* Improvement of update timing for OLED display (Need TWI_Init)
2018-08-22 09:51:37 -07:00

249 lines
8.7 KiB
C
Raw Blame History

#include QMK_KEYBOARD_H
#include "bootloader.h"
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#include "split_util.h"
#endif
#ifdef SSD1306OLED
#include "LUFA/Drivers/Peripheral/TWI.h"
#include "ssd1306.h"
#endif
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _LOWER 3
#define _RAISE 4
#define _ADJUST 16
enum custom_keycodes {
LOWER = SAFE_RANGE,
RAISE,
ADJUST,
RGBRST
};
#define KC______ KC_TRNS
#define KC_XXXXX KC_NO
#define KC_KANJI KC_GRV
#define KC_LOWER LOWER
#define KC_RAISE RAISE
#define KC_RST RESET
#define KC_LRST RGBRST
#define KC_LTOG RGB_TOG
#define KC_LHUI RGB_HUI
#define KC_LHUD RGB_HUD
#define KC_LSAI RGB_SAI
#define KC_LSAD RGB_SAD
#define KC_LVAI RGB_VAI
#define KC_LVAD RGB_VAD
#define KC_LSMOD RGB_SMOD
#define KC_KNRM AG_NORM
#define KC_KSWP AG_SWAP
#define KC_GUAP LALT_T(KC_APP)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
ESC, Q, W, E, R, T, Y, U, I, O, P, MINS,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LSFT, A, S, D, F, G, H, J, K, L, UP, ENT,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LCTRL, Z, X, C, V, B, N, M, COMM, LEFT, DOWN, RGHT,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
LGUI, LOWER, BSPC, SPC, RAISE, GUAP \
//`--------------------' `--------------------'
),
[_LOWER] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
TAB, F1, F2, F3, F4, F5, XXXXX, MINS, EQL, JYEN, LBRC, RBRC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
_____, F6, F7, F8, F9, F10, XXXXX, XXXXX, XXXXX, SCLN, QUOT, BSLS,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
_____, F11, F12, XXXXX, KANJI, ENT, XXXXX, XXXXX, COMM, DOT, SLSH, RO,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
_____, _____, DEL, _____, _____, APP \
//`--------------------' `--------------------'
),
[_RAISE] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
_____, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, XXXXX,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
_____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, 4, 5, 6, QUOT, XXXXX,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
_____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, 0, 1, 2, 3, DOT, XXXXX,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
_____, _____, BSPC, _____, _____, LALT \
//`--------------------' `--------------------'
),
[_ADJUST] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
_____, RST, LRST, KNRM, KSWP,XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
//|------+-------+------+------+------+-----| |------+------+------+------+------+------|
_____, LTOG, LHUI, LSAI, LVAI,XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, PGUP, XXXXX,\
//|------+-------+------+------+------+-----| |------+------+------+------+------+------|
_____, LSMOD, LHUD, LSAD, LVAD,XXXXX, XXXXX, XXXXX, XXXXX, HOME, PGDN, END,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
_____, _____, XXXXX, _____, _____, XXXXX \
//`--------------------' `--------------------'
)
};
int RGB_current_mode;
// Setting ADJUST layer RGB back to default
inline void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
layer_on(layer3);
} else {
layer_off(layer3);
}
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
iota_gfx_init(!has_usb()); // turns on the display
#endif
}
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
// When add source files to SRC in rules.mk, you can use functions.
const char *read_layer_state(void);
const char *read_logo(void);
void set_keylog(uint16_t keycode, keyrecord_t *record);
const char *read_keylog(void);
const char *read_keylogs(void);
// const char *read_mode_icon(bool swap);
// const char *read_host_led_state(void);
// void set_timelog(void);
// const char *read_timelog(void);
#ifdef RGBLIGHT_ENABLE
const char *read_rgb_info(void);
#define RENDER_RGB_INFO(m) matrix_write_ln(m, (const char*)read_rgb_info())
#else
#define RENDER_RGB_INFO(m)
#endif
void matrix_scan_user(void) {
iota_gfx_task();
}
inline void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
// If you want to change the display of OLED, you need to change here
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
RENDER_RGB_INFO(matrix);
// matrix_write_ln(matrix, read_keylogs());
// matrix_write_ln(matrix, read_host_led_state());
// matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
// matrix_write_ln(matrix, read_timelog());
} else {
matrix_write(matrix, read_logo());
}
}
inline void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
matrix_clear(&matrix);
matrix_render_user(&matrix);
matrix_update(&display, &matrix);
}
#endif
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
#ifdef SSD1306OLED
if (record->event.pressed) {
set_keylog(keycode, record);
// set_timelog();
}
#endif
switch (keycode) {
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
break;
#ifdef RGBLIGHT_ENABLE
case RGB_MOD:
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
RGB_current_mode = rgblight_config.mode;
}
break;
case RGBRST:
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_mode = rgblight_config.mode;
}
break;
#endif
default:
return true;
}
return false;
}
Reference in New Issue View Git Blame Copy Permalink