qmk_firmware/keyboards/vinta
Joel Challis e34af631c2
Refactor f103,f072,f042 based keyboards to use new MCU selection defaults (#7705)
* refactor keyboards using ST_STM32F072B_DISCOVERY to use 'MCU = STM32F072'

* refactor keyboards using GENERIC_STM32_F042X6 to use 'MCU = STM32F042'

* refactor keyboards using GENERIC_STM32_F103 to use 'MCU = STM32F103'
2020-01-10 01:31:01 +00:00
..
boards/GENERIC_STM32_F042X6 Keyboard: Vinta (#4283) 2018-10-29 22:00:40 -07:00
keymaps/default Update Vinta (#4705) 2018-12-21 18:39:25 -08:00
bootloader_defs.h Keyboard: Vinta (#4283) 2018-10-29 22:00:40 -07:00
chconf.h Keyboard: Vinta (#4283) 2018-10-29 22:00:40 -07:00
config.h Remove CUSTOM_MATRIX option from diode direction (#5090) 2019-02-18 08:49:51 -08:00
halconf.h Keyboard: Vinta (#4283) 2018-10-29 22:00:40 -07:00
info.json 65 ansi blocker everywhere (everywhere I can find) (#6805) 2019-09-25 12:55:27 -07:00
mcuconf.h Keyboard: Vinta (#4283) 2018-10-29 22:00:40 -07:00
readme.md Modified URLs to point to new locations 2019-01-13 09:11:18 -08:00
rules.mk Refactor f103,f072,f042 based keyboards to use new MCU selection defaults (#7705) 2020-01-10 01:31:01 +00:00
vinta.c Keyboard: Vinta (#4283) 2018-10-29 22:00:40 -07:00
vinta.h 65 ansi blocker everywhere (everywhere I can find) (#6805) 2019-09-25 12:55:27 -07:00

readme.md

Vinta

Vinta

This is an ARM-powered 65% keyboard PCB with USB Mini B connector and breakout for optional RGB underglow.

Keyboard Maintainer: Peioris and on github
Hardware Supported: Vinta with STM32F042K6T6
Hardware Availability: Private Groupbuy (will post on Reddit once QMK has RGB underglow working)

Make example for this keyboard (after setting up your build environment):

make vinta:default

See build environment setup then the make instructions for more information.

Developer's Note

STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a RESET keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a RESET keycode).