qmk_firmware/keyboards/dztech/dz60rgb
datafx b1c5a53a68
Add bootloader size (#13729)
* Add bootloader size

Bootloader size needs to be 6144 to allow QMK to jump to the correct location with bootmagic

* Include dz60rgb v2.1

Add boot loader size to this pcb also
2021-07-27 10:07:29 +10:00
..
keymaps Fix some RGB Matrix-enabled keymaps referring to RGBLight mode (#13509) 2021-07-15 03:50:09 +10:00
v1 Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00
v2 Remove FAUXCLICKY feature (deprecated) (#11829) 2021-02-09 09:49:05 -08:00
v2_1 Add bootloader size (#13729) 2021-07-27 10:07:29 +10:00
config.h Tidy up dztech config.h 2019-12-18 10:23:26 +11:00
dz60rgb.c Fix compilation warning for the DZ60RGB/DZ65RGB when RGB matrix is disabled (#9791) 2020-07-22 15:55:35 +10:00
dz60rgb.h Tidy up dztech keyboard.c/h and readmes (#7664) 2020-01-14 08:49:31 +11:00
info.json Tidy up dztech default keymaps and info.json (#7608) 2019-12-18 10:15:47 +11:00
readme.md [Keyboard] adds new revision: dztech/dz60rgb/v2_1 (#13636) 2021-07-22 09:39:08 -07:00

readme.md

DZ60RGB

dz60rgb

A hotswap 60% RGB keyboard.

  • Keyboard Maintainer: moyi4681
  • Hardware Supported: DZtech DZ60RGB V1 and V2
  • Hardware Availability: KBDfans

There are three versions of the DZ60RGB. Please use the appropriate firmware for your board.

  • V1: STM32F303 (Arm), takes .bin files
  • V2: ATmega32U4 (AVR), takes .hex files
  • V2.1: ATmega32U4 (AVR), takes .bin files Flash Manual
    Started shipping in June 2021 as a slightly modified version of v2.

Make example for this keyboard (after setting up your build environment):

make dztech/dz60rgb/v1:default # Arm (STM32F303)
make dztech/dz60rgb/v2:default # AVR (ATmega32U4)
make dztech/dz60rgb/v2_1:default # AVR (ATmega32U4)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.