gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-22 11:29:26 +00:00
Code Issues Packages Projects Releases Wiki Activity
9a4f39b738
qmk_firmware/keyboards/skyloong/gk61/v1
History
Ryan 65a04ead32
LED drivers: update keyboard LED configs (#23073) 
* IS31FL3733: update keyboard LED config

* IS31FL3736: update keyboard LED config

* IS31FL3737: update keyboard LED config

* IS31FL3741: update keyboard LED config

* IS31FL3743A: update keyboard LED config

* AW20216S: update keyboard LED config

* SNLED27351: update keyboard LED config
2024-02-25 21:29:37 +00:00
..
keymaps add Skyloong/GK61_V1 keyboard (#21364) 2023-10-03 21:01:10 -07:00
config.h LED drivers: add support for shutdown pin (#23058) 2024-02-15 07:11:50 +00:00
halconf.h add Skyloong/GK61_V1 keyboard (#21364) 2023-10-03 21:01:10 -07:00
info.json Migrate RGB Matrix config to info.json - RS (#22909) 2024-01-16 01:03:55 +00:00
mcuconf.h add Skyloong/GK61_V1 keyboard (#21364) 2023-10-03 21:01:10 -07:00
readme.md add Skyloong/GK61_V1 keyboard (#21364) 2023-10-03 21:01:10 -07:00
rules.mk add Skyloong/GK61_V1 keyboard (#21364) 2023-10-03 21:01:10 -07:00
v1.c LED drivers: update keyboard LED configs (#23073) 2024-02-25 21:29:37 +00:00

readme.md

GK61

GK61

The PCB features:

  • QMK & VIA compatibility
  • RGB Matrix backlight

The following is the QMK Firmware for the Destop 60% keylayout - designed in Dongguan Jizhi Electronic Technology Co., Ltd

Make example for this keyboard (after setting up your build environment):

make skyloong/gk61/v1:default
make skyloong/gk61/v1:via

Flashing example for this keyboard:

make skyloong/gk61/v1:default:flash
make skyloong/gk61/v1:via:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available