qmk_firmware/keyboards/rgbkb/mun
James Young 4b453dca92
Remove MIDI Configuration boilerplate (#11151)
* remove keyboard-level instances of `MIDI_ENABLE = no`

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e  '/^[ #]*MIDI_ENABLE[ \t]*=[ \t]*no/d' {} +
```

Co-Authored-By: Nick Brassel <nick@tzarc.org>

* fix case-sensitivity issues on MIDI_ENABLE

Change instances of `MIDI_ENABLE = YES` to `MIDI_ENABLE = yes`.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE[ \t]*=[ \t]*[Yy][Ee][Ss];MIDI_ENABLE = yes;g' {} +
```

* replace `# MIDI controls` with `# MIDI support`

Replace `# MIDI controls` with `# MIDI support` in keyboard-level `rules.mk` files.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*MIDI[ \t]*\(controls\|support\).*;# MIDI support;g' {} +
```

* align inline comments

Aligns the inline comments to the length used by the QMK AVR rules.mk template.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE *= *yes.*;MIDI_ENABLE = yes           # MIDI support;g'  {} +
```

* remove commented instances of `MIDI_ENABLE` from keyboard `rules.mk` files

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#\([ \t]*MIDI_ENABLE\) = yes; \1 = no ;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;^\([ \t]*\)\(MIDI_ENABLE = no\);\2\1;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]\+MIDI_ENABLE *= *no/d' {} +
```

* remove MIDI configuration boilerplate from keyboard config.h files

Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-08-16 06:51:13 +10:00
..
keymaps Tidy up rgbkb/mun (#13801) 2021-08-05 00:59:50 +01:00
rev1 Tidy up rgbkb/mun (#13801) 2021-08-05 00:59:50 +01:00
.noci Keyboards/RGBKB/Mün (#13239) 2021-06-25 22:00:21 -07:00
config.h Clean up remaining RGB_DISABLE_WHEN_USB_SUSPENDED defines (#13689) 2021-07-24 20:17:04 +01:00
halconf.h Tidy up rgbkb/mun (#13801) 2021-08-05 00:59:50 +01:00
matrix.c Tidy up rgbkb/mun (#13801) 2021-08-05 00:59:50 +01:00
mcuconf.h Tidy up rgbkb/mun (#13801) 2021-08-05 00:59:50 +01:00
mun.c Tidy up rgbkb/mun (#13801) 2021-08-05 00:59:50 +01:00
mun.h Keyboards/RGBKB/Mün (#13239) 2021-06-25 22:00:21 -07:00
readme.md Keyboards/RGBKB/Mün (#13239) 2021-06-25 22:00:21 -07:00
rules.mk Remove MIDI Configuration boilerplate (#11151) 2021-08-16 06:51:13 +10:00

readme.md

Mün

Mün

Mün is powered by STM32 with full QMK support. Each key has super-bright RGB backlighting and MX Kailh hotswap sockets. No soldering is required to get a fully functioning keyboard. There are an additional 14 rear-facing RGB LEDs on each side. Each half can be configured to run as master or slave with the two USB-C ports. They also support up to two rotary encoders and one OLED panel per half.

Keyboard Maintainer: Legonut
Hardware Supported: Mün PCB R1.0, R1.1, R1.2 Hardware Availability: RGBKB

Make example for this keyboard (after setting up your build environment):

make rgbkb/mun:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.