gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-22 01:23:23 +00:00
Code Issues Packages Projects Releases Wiki Activity
97910fac06
qmk_firmware/keyboards/system76/launch_1
History
Ryan e12ca14af8
Change RGB_MATRIX_STARTUP_* defines to RGB_MATRIX_DEFAULT_* (#19079)
2022-11-27 04:18:24 +11:00
..
keymaps/default RESET -> QK_BOOT default keymaps (#17037) 2022-05-15 20:26:27 +01:00
config.h Change RGB_MATRIX_STARTUP_* defines to RGB_MATRIX_DEFAULT_* (#19079) 2022-11-27 04:18:24 +11:00
info.json Move keyboard USB IDs and strings to data driven: S (#17889) 2022-08-04 08:12:37 +10:00
launch_1.c Remove more RESET keycode references (#18252) 2022-09-03 06:50:44 +01:00
launch_1.h [Keyboard] Add system76/launch_1 keyboard (#15395) 2022-01-10 17:39:10 -08:00
post_rules.mk [Keyboard] Add system76/launch_1 keyboard (#15395) 2022-01-10 17:39:10 -08:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rgb_matrix_kb.inc Change DRIVER_LED_COUNT to {LED,RGB}_MATRIX_LED_COUNT (#18399) 2022-09-23 22:46:23 +10:00
rules.mk [Keyboard] Add system76/launch_1 keyboard (#15395) 2022-01-10 17:39:10 -08:00
usb_mux.c [Keyboard] Add system76/launch_1 keyboard (#15395) 2022-01-10 17:39:10 -08:00
usb_mux.h [Keyboard] Add system76/launch_1 keyboard (#15395) 2022-01-10 17:39:10 -08:00

readme.md

System76 Launch Configurable Keyboard (launch_1)

System76 Launch Configurable Keyboard

The Launch Configurable Keyboard is engineered to be comfortable, fully customizable, and make your workflow more efficient.

  • High-speed USB Hub
  • Works on Linux, Windows and macOS
  • 100% Open Source
  • Made in Colorado

Additional Launch Keyboard resources:

Building Firmware

To build the firmware using make (after setting up the build environment), e.g.:

make -r system76/launch_1:default

Equivalently, using the QMK CLI:

qmk compile -kb system76/launch_1 -km default

Flashing Firmware (DFU)

To build and flash the firmware on the keyboard, e.g.:

make -r system76/launch_1:default:flash

Equivalently, using the QMK CLI:

qmk flash -kb system76/launch_1 -km default

Flashing Firmware (ISP)

To flash the firmware (and/or bootloader) using ISP refer to the ISP Flashing Guide.

Factory fuse values => Low: 0x5E, High: 0x99, Extended: 0xF3, Lock Bits: 0xFF

Environment Setup

See the build environment setup and the make instructions for more information. If new to QMK, start with the Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (Escape) and plug in the keyboard.
  • Keycode in layout: Press the key mapped to QK_BOOT in the second layer (Escape).
  • Electrical reset: Briefly short AVR ISP's GND (6) and RST (5) pads on the back of the PCB.