gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-30 06:55:51 +00:00
Code Issues Packages Projects Releases Wiki Activity
97522bd58a
qmk_firmware/keyboards/ekow/akira
History
Ryan 2da0827d4f
Remove matrix size defines (#19581)
2023-02-17 16:08:25 +11:00
..
keymaps Remove legacy keycodes, part 5 (#18710) 2022-10-15 22:29:43 +01:00
akira.c Adding akira (#16982) 2022-05-10 17:00:30 +01:00
akira.h Adding akira (#16982) 2022-05-10 17:00:30 +01:00
config.h Remove matrix size defines (#19581) 2023-02-17 16:08:25 +11:00
info.json Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

AKIRA

  • Keyboard Maintainer: eugenepy
  • Hardware Supported: AKIRA pcb, both Hotswap and solderable.
  • Hardware Availability: Not yet on groupbuy

Build

Make example for this keyboard (after setting up your build environment):

make ekow/akira:default

Flashing example for this keyboard:

make ekow/akira:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the Buttom on the back of the PCB, the board will enter the dfu-mode, no extra pads need to short.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available