gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-26 13:16:44 +00:00
Code Issues Packages Projects Releases Wiki Activity
9645ca221f
qmk_firmware/keyboards/matrix/falcon
History
Ryan 5e4b076af3
Remove legacy keycodes, part 5 (#18710) 
* `KC_SLCK` -> `KC_SCRL`
* `KC_NLCK` -> `KC_NUM`
2022-10-15 22:29:43 +01:00
..
keymaps Remove legacy keycodes, part 5 (#18710) 2022-10-15 22:29:43 +01:00
config.h Remove UNUSED_PINS (#17931) 2022-08-06 23:23:35 +10:00
falcon.c add falcon keyboard (#13674) 2021-08-14 16:35:32 +10:00
falcon.h add falcon keyboard (#13674) 2021-08-14 16:35:32 +10:00
info.json Move keyboard USB IDs and strings to data driven: M (#17859) 2022-08-03 17:15:43 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00

readme.md

Falcon AVR

PCB using atmega32u4 for the Matrix Falcon

  • Keyboard Maintainer: astro
  • Hardware Supported: Matrix Falcon
  • Hardware Availability: Limited GB

Make example for this keyboard (after setting up your build environment):

make matrix/falcon:default

Flashing example for this keyboard:

make matrix/falcon:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard.
  • Physical reset button: Briefly short cut the RST pin with the GND pin (pin at the topside of the RST) on the back of the PCB.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available.