mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-02 16:05:09 +00:00

History

Ryan 407d6a2b67 [Keyboard] Fix error_log complaint about handwired/onekey layout macro (#9263 )		2020-06-07 22:49:18 -07:00
..
config.h	[Keymap] I2C scanner (#8454 )	2020-03-18 11:14:45 -07:00
keymap.c	[Keyboard] Fix error_log complaint about handwired/onekey layout macro (#9263 )	2020-06-07 22:49:18 -07:00
readme.md	[Keymap] I2C scanner (#8454 )	2020-03-18 11:14:45 -07:00
rules.mk	[Keymap] I2C scanner (#8454 )	2020-03-18 11:14:45 -07:00

readme.md

i2c_scanner

Aiming to provide a more qmk friendly version of https://playground.arduino.cc/Main/I2cScanner/

This very simple ~~sketch~~ keymap scans the I2C-bus for devices. If a device is found, it is reported to the ~~Arduino serial monitor~~ console.

Flashing

Pick a target that is aligned to the MCU you want to test:

make handwired/onekey/elite_c:i2c_scanner:flash # also 32u4 + dfu bootloader
make handwired/onekey/promicro:i2c_scanner:flash
make handwired/onekey/teensy_2:i2c_scanner:flash

# ChibiOS is currently 'best effort' and might not report accurate results
make handwired/onekey/proton_c:i2c_scanner:flash

others might work with additional configuration.

Usage

Output is viewable through a compatible tool https://docs.qmk.fm/#/newbs_testing_debugging?id=debugging-tools.

You can change the wires, and plug-in I2C devices while the i2c_scanner is running.

The output of the console will look like this:

Listening:
Scanning...
  I2C device found at address 0x20
done