gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-25 20:56:42 +00:00
Code Issues Packages Projects Releases Wiki Activity
962e4c0e18
qmk_firmware/keyboards/paprikman/albacore
History
Ryan 5e4b076af3
Remove legacy keycodes, part 5 (#18710) 
* `KC_SLCK` -> `KC_SCRL`
* `KC_NLCK` -> `KC_NUM`
2022-10-15 22:29:43 +01:00
..
keymaps Remove legacy keycodes, part 5 (#18710) 2022-10-15 22:29:43 +01:00
albacore.c
albacore.h
config.h Change {LED,RGB}_DISABLE_TIMEOUT to {LED,RGB}_MATRIX_TIMEOUT (#18415) 2022-09-26 14:40:15 +10:00
info.json Move keyboard USB IDs and strings to data driven: P (#17875) 2022-08-03 17:23:15 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk More keyboard rules.mk cleanups (#16044) 2022-01-25 20:21:08 +00:00

readme.md

Albacore

A small 7-key macropad featuring hotswap and per-key RGB

Albacore

  • Keyboard Maintainer: paprikman
  • Hardware Supported: Albacore hotswap pcb
  • Hardware Availability: Private group buy

Make example for this keyboard (after setting up your build environment):

make paprikman/albacore:default

Flashing example for this keyboard:

make paprikman/albacore:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

There are several ways to enter the bootloader:

  • Using keycode: Press the QK_BOOT key (if mapped)
  • Bootmagic reset: Hold the left bottom key (default mod key) and plug the usb cable
  • Physical reset: In the top right corner of the bottom part of the pcb you will find two pads. Shorten them with tweezers and plug the usb cable, then release. It is also possible to shorten these pads while the macropad is already connected (shorten and hold for a couple of seconds, then release).