qmk_firmware/LUFA/Drivers/USB/HighLevel/USBTask.c
Dean Camera 8f6b4ddf76 Fixed GenericHIDHost demo report write routine incorrect for control type requests (thanks to Andrei Krainev).
Removed Endpoint_ClearCurrentBank() and Pipe_ClearCurrentBank() in favour of new Endpoint_ClearIN(), Endpoint_ClearOUT(), Endpoint_ClearControlIN(), Endpoint_ClearControlOUT(), Pipe_ClearIN(), Pipe_ClearOUT(), Pipe_ClearControlIN() and Pipe_ClearControlOUT() macros (done to allow for the detection of packets of zero length).

Renamed *_ReadWriteAllowed() macros to *_IsReadWriteAllowed() to remain consistent with the rest of the LUFA API.

Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived(), Endpoint_ClearSetupReceived() macro has been renamed to Endpoint_ClearControlSETUP(), the Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent() and the Pipe_ClearSetupSent() macro is no longer applicable and should be removed - changes made to compliment the new endpoint and pipe bank management API.

Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel).

Updated library doxygen documentation, added groups, changed documentation macro functions to real functions for clarity.

Removed old endpoint and pipe aliased read/write/discard routines which did not have an explicit endian specifier for clarity.

Removed the ButtLoadTag.h header file, as no one used for its intended purpose anyway.
2009-04-16 08:50:34 +00:00

260 lines
6.7 KiB
C

/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
#include "USBMode.h"
#define INCLUDE_FROM_USBTASK_C
#include "USBTask.h"
volatile bool USB_IsSuspended;
volatile bool USB_IsConnected;
volatile bool USB_IsInitialized;
#if defined(USB_CAN_BE_HOST)
volatile uint8_t USB_HostState;
#endif
TASK(USB_USBTask)
{
#if defined(USB_HOST_ONLY)
USB_HostTask();
#elif defined(USB_DEVICE_ONLY)
USB_DeviceTask();
#else
if (USB_CurrentMode == USB_MODE_DEVICE)
USB_DeviceTask();
else if (USB_CurrentMode == USB_MODE_HOST)
USB_HostTask();
#endif
}
#if defined(USB_CAN_BE_DEVICE)
static void USB_DeviceTask(void)
{
if (USB_IsConnected)
{
uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
if (Endpoint_IsSETUPReceived())
{
ATOMIC_BLOCK(ATOMIC_RESTORESTATE)
{
USB_Device_ProcessControlPacket();
}
}
Endpoint_SelectEndpoint(PrevEndpoint);
}
}
#endif
#if defined(USB_CAN_BE_HOST)
static void USB_HostTask(void)
{
uint8_t ErrorCode = HOST_ENUMERROR_NoError;
uint8_t SubErrorCode = HOST_ENUMERROR_NoError;
static uint16_t WaitMSRemaining;
static uint8_t PostWaitState;
uint8_t PrevPipe = Pipe_GetCurrentPipe();
Pipe_SelectPipe(PIPE_CONTROLPIPE);
switch (USB_HostState)
{
case HOST_STATE_WaitForDevice:
if (WaitMSRemaining)
{
if ((SubErrorCode = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)
{
USB_HostState = PostWaitState;
ErrorCode = HOST_ENUMERROR_WaitStage;
break;
}
WaitMSRemaining--;
}
else
{
USB_HostState = PostWaitState;
}
break;
case HOST_STATE_Attached:
WaitMSRemaining = HOST_DEVICE_SETTLE_DELAY_MS;
USB_HostState = HOST_STATE_Attached_WaitForDeviceSettle;
break;
case HOST_STATE_Attached_WaitForDeviceSettle:
_delay_ms(1);
if (!(WaitMSRemaining--))
{
USB_Host_VBUS_Manual_Off();
USB_OTGPAD_On();
USB_Host_VBUS_Auto_Enable();
USB_Host_VBUS_Auto_On();
USB_HostState = HOST_STATE_Attached_WaitForConnect;
}
break;
case HOST_STATE_Attached_WaitForConnect:
if (USB_INT_HasOccurred(USB_INT_DCONNI))
{
USB_INT_Clear(USB_INT_DCONNI);
USB_INT_Clear(USB_INT_DDISCI);
USB_INT_Clear(USB_INT_VBERRI);
USB_INT_Enable(USB_INT_VBERRI);
USB_IsConnected = true;
RAISE_EVENT(USB_Connect);
USB_Host_ResumeBus();
Pipe_ClearPipes();
HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Attached_DoReset);
}
break;
case HOST_STATE_Attached_DoReset:
USB_Host_ResetDevice();
HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Powered);
break;
case HOST_STATE_Powered:
Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL,
PIPE_TOKEN_SETUP, PIPE_CONTROLPIPE,
PIPE_CONTROLPIPE_DEFAULT_SIZE, PIPE_BANK_SINGLE);
if (!(Pipe_IsConfigured()))
{
ErrorCode = HOST_ENUMERROR_PipeConfigError;
SubErrorCode = 0;
break;
}
USB_HostState = HOST_STATE_Default;
break;
case HOST_STATE_Default:
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
bRequest: REQ_GetDescriptor,
wValue: (DTYPE_Device << 8),
wIndex: 0,
wLength: PIPE_CONTROLPIPE_DEFAULT_SIZE,
};
uint8_t DataBuffer[PIPE_CONTROLPIPE_DEFAULT_SIZE];
if ((SubErrorCode = USB_Host_SendControlRequest(DataBuffer)) != HOST_SENDCONTROL_Successful)
{
ErrorCode = HOST_ENUMERROR_ControlError;
break;
}
#if defined(USE_NONSTANDARD_DESCRIPTOR_NAMES)
USB_ControlPipeSize = DataBuffer[offsetof(USB_Descriptor_Device_t, Endpoint0Size)];
#else
USB_ControlPipeSize = DataBuffer[offsetof(USB_Descriptor_Device_t, bMaxPacketSize0)];
#endif
USB_Host_ResetDevice();
HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Default_PostReset);
break;
case HOST_STATE_Default_PostReset:
Pipe_DisablePipe();
Pipe_DeallocateMemory();
Pipe_ResetPipe(PIPE_CONTROLPIPE);
Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL,
PIPE_TOKEN_SETUP, PIPE_CONTROLPIPE,
USB_ControlPipeSize, PIPE_BANK_SINGLE);
if (!(Pipe_IsConfigured()))
{
ErrorCode = HOST_ENUMERROR_PipeConfigError;
SubErrorCode = 0;
break;
}
Pipe_SetInfiniteINRequests();
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
bRequest: REQ_SetAddress,
wValue: USB_HOST_DEVICEADDRESS,
wIndex: 0,
wLength: 0,
};
if ((SubErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
ErrorCode = HOST_ENUMERROR_ControlError;
break;
}
HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Default_PostAddressSet);
break;
case HOST_STATE_Default_PostAddressSet:
USB_Host_SetDeviceAddress(USB_HOST_DEVICEADDRESS);
RAISE_EVENT(USB_DeviceEnumerationComplete);
USB_HostState = HOST_STATE_Addressed;
break;
}
if ((ErrorCode != HOST_ENUMERROR_NoError) && (USB_HostState != HOST_STATE_Unattached))
{
RAISE_EVENT(USB_DeviceEnumerationFailed, ErrorCode, SubErrorCode);
USB_Host_VBUS_Auto_Off();
RAISE_EVENT(USB_DeviceUnattached);
if (USB_IsConnected)
RAISE_EVENT(USB_Disconnect);
USB_ResetInterface();
}
Pipe_SelectPipe(PrevPipe);
}
#endif