qmk_firmware/keyboards/flxlb/zplit/config.h

89 lines
2.4 KiB
C

/*
Copyright 2021 fluxlab
Copyright 2015 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x7076
#define PRODUCT_ID 0x0001
#define DEVICE_VER 0x0001
#define MANUFACTURER fluxlab
#define PRODUCT zplit
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 8
#define MATRIX_COLS 6
// wiring of each half
#define MATRIX_ROW_PINS { D4, F5, F4, F1 }
#define MATRIX_COL_PINS { B2, B3, D6, D7, B4, B5 }
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* configuration for split keyboard */
#define SOFT_SERIAL_PIN D0
#define SELECT_SOFT_SERIAL_SPEED 1
// #define USE_I2C
#define SPLIT_USB_DETECT
#define SPLIT_USB_TIMEOUT 500
#define ENCODERS_PAD_A { B0 }
#define ENCODERS_PAD_B { D2 }
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLED_NUM 16
#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 7, 15, 14, 13, 12, 11, 10, 9, 8}
#define RGBLED_SPLIT { 8, 8 }
#define RGBLIGHT_SPLIT
#define RGBLIGHT_ANIMATIONS
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT