mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-05 01:15:19 +00:00
.. | ||
asci-keymap.txt | ||
build.sh | ||
config.h | ||
keymap.c | ||
push.sh | ||
README.md | ||
template.txt |
Ivan's Ergodox Config
Details about the layout
- Shift and Cmd are One Shot Modifiers, so tapping them once will apply them to the next key. When tapped twice they will lock, until tapped again to clear.
- When switching to other layers, any stuck modifiers are cleared in order to avoid unintended key combos
- There are a few leader key combinations. Right now,
KC_LEAD
+s
will open my wiki homepage. - All transparent keys have been replaced with noops to avoid layer bleeding.
Initial Setup
QMK
brew tap osx-cross/avr
brew tap PX4/homebrew-px4
brew update
brew install avr-gcc
brew install dfu-programmer
brew install gcc-arm-none-eabi
brew install avrdude
git clone https://github.com/qmk/qmk_firmware.git
git clone https://github.com/issmirnov/ergodox-layout.git \
layouts/community/ergodox/ismirnov
Teensy utils
Download and add both of these to $PATH
Flashing
make ergodox_ez:ismirnov
teensy_loader_cli -mmcu=atmega32u4 -w -v ergodox_ez_ismirnov.hex
# or just
make ergodox_ez:ismirnov:flash
Gotchas
- If you get error:
dyld: Library not loaded: /usr/local/opt/isl/lib/libisl.15.dylib
then dobrew reinstall avr-gcc
- If
hid_listen
just prints out a ton of dots, update makefile withCONSOLE_ENABLE = yes