mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-14 22:00:53 +00:00
1.2 KiB
1.2 KiB
Galatea
TKL H87/88c compatible PCB with support for the most common layouts.
- Keyboard Maintainer: Studio Kestra
- Hardware Supported: studiokestra.ca/galatea
- Hardware Availability: In-Stock Sale (Dec 2021)
- Rev1 firmware is used for Galatea PCBs with no RGB underglow.
- Rev2 firmware is used for Galatea PCBs with RGB underglow.
Bootload Sequence
There are 3 ways to put the board in bootloader mode:
- Hold the top-left key (typically
Esc
) while plugging in the USB cable, OR - While the PCB is plugged into the PC, press the physical
RESET
button on the back of the board, OR - With the default layout, toggle Layer 1 and press the
R
key.
Compiling Firmware
Make example for this keyboard (after setting up your build environment):
make studiokestra/galatea/rev1:default
If no revision is specified, it will build rev1 firmware by default.
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.