qmk_firmware/keyboards/tzarc/djinn
Ryan 569b0c70be
WS2812 PWM: prefix for DMA defines (#23111)
* WS2812 PWM: prefix for DMA defines

* Add backward compatibility defines
2024-03-02 17:16:47 +00:00
..
graphics Clean up usage of QMK_KEYBOARD_H (#20167) 2023-03-20 08:12:05 +11:00
keymaps Encodermap direction define. (#20454) 2023-04-15 16:18:44 +01:00
rev1 Migrate RGB Matrix config to info.json - TUVW (#22910) 2024-01-16 01:16:31 +00:00
rev2 Migrate RGB Matrix config to info.json - TUVW (#22910) 2024-01-16 01:16:31 +00:00
config.h WS2812 PWM: prefix for DMA defines (#23111) 2024-03-02 17:16:47 +00:00
djinn_portscan_matrix.c Fix up scanning for Djinn, post-asyncUSB. (#23188) 2024-03-02 08:45:11 +11:00
djinn_split_sync.c Sync activity timestamps between sides. (#20192) 2023-03-21 10:16:11 +01:00
djinn_usbpd.c [chore] keyboards/tzarc: Alignment with clang-format. (#20265) 2023-03-26 23:56:09 +01:00
djinn.c Sync activity timestamps between sides. (#20192) 2023-03-21 10:16:11 +01:00
djinn.h Sync activity timestamps between sides. (#20192) 2023-03-21 10:16:11 +01:00
halconf.h Add Djinn. (#17382) 2022-06-20 14:20:56 +10:00
info.json Remove use of broken split.main (#22363) 2023-10-30 00:49:56 +00:00
mcuconf.h Add Djinn. (#17382) 2022-06-20 14:20:56 +10:00
readme.md Add Djinn. (#17382) 2022-06-20 14:20:56 +10:00
rules.mk Migrate spi EEPROM_DRIVER to info.json (#21991) 2023-09-13 13:45:49 +01:00

Djinn

Djinn

The Djinn is a 64-key split keyboard -- dual 4x7 with a 4-key thumb cluster and encoders. It also has a 5-way tactile switch under the thumb. Oh, and two displays.

Keyboard Maintainer: tzarc
Hardware Supported: Djinn: rev1, rev2
Hardware Availability: Open-source

Make example for this keyboard (after setting up your build environment):

make tzarc/djinn/rev2:default

Flashing example for this keyboard:

make tzarc/djinn/rev2:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top-left key and plug in the keyboard.
  • Physical reset button: Briefly press the button on the back of the PCB.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available.