mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-05 17:30:56 +00:00
.. | ||
keymaps | ||
chconf.h | ||
config.h | ||
halconf.h | ||
info.json | ||
mcuconf.h | ||
readme.md | ||
rules.mk |
E80-1800
A replacement PCB for the Cherry G80-1800 keyboard. Supports ISO and ANSI, 6u offcenter or 7u bottom row, stepped and regular caps lock. Optional i2c header for OLED. Type-C on the PCB (requires some case modifications). The PCB is open source and can be found in my Github repo.
- Keyboard Maintainer: ebastler
- Hardware Supported: r1 and r1.1 PCB, see Github repo linked above
- Hardware Availability: Groupbuy, otherwise feel free to order your own boards. jlcpcb compatible gerber/BOM/CPL files are included.
How to enter the Bootloader:
- No pre-flashed firmware, option 1: Bridge
BOOT
labeled pads below spacebar while plugging the board in - No pre-flashed firmware, option 2: Bridge
BOOT
labeled pads below spacebar, then quickly shortRST
labeled pads - Pre-flashed firmware: Use Bootmagic - keep the
ESC
(top left most) key pressed while plugging the board in
Make example for this keyboard (after setting up your build environment):
make ebastler/e80_1800:default
Flash example for this keyboard (after setting up your build environment):
make ebastler/e80_1800:default
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.