gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-13 21:30:47 +00:00
Code Issues Packages Projects Releases Wiki Activity
828f6d321e
qmk_firmware/keyboards/yushakobo/navpad/10
History
Ryan ccb6c908dd
Remove SOFT_SERIAL_PIN for non-split boards (#19774) 
* Remove `SOFT_SERIAL_PIN` for non-split boards

* Delete more empty config.h
2023-02-08 23:57:42 +00:00
..
keymaps Remove legacy EEPROM clear keycodes (#18782) 2022-10-20 12:20:07 +01:00
rev0 Remove usages of config_common.h from config.h files. (#19714) 2023-01-31 06:03:30 +11:00
rev1 Remove usages of config_common.h from config.h files. (#19714) 2023-01-31 06:03:30 +11:00
10.c [Keyboard] New kbd Navpad 1.0 (#15507) 2022-01-10 17:43:36 -08:00
10.h [Keyboard] New kbd Navpad 1.0 (#15507) 2022-01-10 17:43:36 -08:00
config.h Remove SOFT_SERIAL_PIN for non-split boards (#19774) 2023-02-08 23:57:42 +00:00
info.json Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

navpad 1.0

navpad_10

Useful and easy to build numpad with nav-cluster

Make example for this keyboard (after setting up your build environment):

make yushakobo/navpad/10:default

Flashing example for this keyboard:

make yushakobo/navpad/10:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available