gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-25 12:46:41 +00:00
Code Issues Packages Projects Releases Wiki Activity
822a4580f4
qmk_firmware/keyboards/idank/sweeq
History
Joel Challis bcfe3a0718
Migrate split.soft_serial_pin to split.serial.pin H-O (#24185)
2024-07-23 15:49:11 +01:00
..
keymaps Remove RGB keycodes from boards with no RGB config (#23709) 2024-05-20 17:11:49 +10:00
config.h [keyboard] add sweeq, a ferris/sweep variant with diodes (#21597) 2023-08-29 21:41:44 -07:00
keyboard.json Migrate split.soft_serial_pin to split.serial.pin H-O (#24185) 2024-07-23 15:49:11 +01:00
readme.md [keyboard] add sweeq, a ferris/sweep variant with diodes (#21597) 2023-08-29 21:41:44 -07:00

readme.md

Sweeq

sweeq

Sweeq is a Ferris Sweep clone that uses diodes, instead of the latter's direct pin matrix.

The primary goal is to free up the SDA/SCL pins so they can be used by auxiliary devices such as a trackball, trackpoint or an OLED screen.

Other than the diode changes and the ability to use hotswap sockets, this keyboard is identical to the original Sweep.

Make example for this keyboard (after setting up your build environment):

make idank/sweeq:default

Flashing example for this keyboard:

make idank/sweeq:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available