gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-15 06:10:53 +00:00
Code Issues Packages Projects Releases Wiki Activity
7f90d4823a
qmk_firmware/keyboards/zykrah/fuyu
History
Ryan 47966dc2a6
Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303)
2023-04-06 18:00:54 +10:00
..
keymaps [Keyboard] Add Fuyu (#19055) 2022-12-13 01:23:37 -08:00
config.h Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
fuyu.c [Keyboard] Add Fuyu (#19055) 2022-12-13 01:23:37 -08:00
info.json Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
readme.md [Keyboard] Add Fuyu (#19055) 2022-12-13 01:23:37 -08:00
rules.mk Move WS2812_DRIVER to data driven (#20248) 2023-03-26 18:22:12 +11:00

readme.md

FUYU

FUYU

A F12 TKL H87-Compat Type-C PCB for the Geon F1-8K

Make example for this keyboard (after setting up your build environment):

make zykrah/fuyu:default

Flashing example for this keyboard:

make zykrah/fuyu:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly short the RST and GND pads on the SWD header twice, or short the BOOT header and plug in keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available