gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-30 06:55:51 +00:00
Code Issues Packages Projects Releases Wiki Activity
7a939ca9b4
qmk_firmware/keyboards/tzarc/ghoul
History
Joel Challis 831deac212
Migrate build target markers to keyboard.json (#23293)
2024-03-30 11:31:50 +00:00
..
graphics
keymaps/default Encodermap direction define. (#20454) 2023-04-15 16:18:44 +01:00
rev1 Migrate build target markers to keyboard.json (#23293) 2024-03-30 11:31:50 +00:00
config.h Migrate RGB Matrix config to info.json - TUVW (#22910) 2024-01-16 01:16:31 +00:00
ghoul.c Clean up usage of QMK_KEYBOARD_H (#20167) 2023-03-20 08:12:05 +11:00
info.json Migrate spi EEPROM_DRIVER to info.json (#21991) 2023-09-13 13:45:49 +01:00
readme.md
rules.mk Generalise ADC driver source inclusion (#22448) 2023-11-12 22:30:27 +00:00

readme.md

Ghoul

Ghoul

Planck-like development board for QMK, using SparkFun MicroMod for hot-swap MCU capability.

  • Keyboard Maintainer: tzarc
  • Hardware Supported: Ghoul rev1 PCB + MicroMod STM32, MicroMod RP2040
  • Hardware Availability: Open-source

Make example for this keyboard (after setting up your build environment):

make tzarc/ghoul/rev1/stm32:default
make tzarc/ghoul/rev1/rp2040:default

Flashing example for this keyboard:

make tzarc/ghoul/rev1/stm32:default:flash
make tzarc/ghoul/rev1/rp2040:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top-left key (usually Escape) and plug in the keyboard
  • Physical reset button: Either press all 5 left-most keys on the bottom row, or hold BOOT and press RESET
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available