gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-03 00:15:11 +00:00
Code Issues Packages Projects Releases Wiki Activity
7630a80791
qmk_firmware/keyboards/mode/m60h_f
History
David Hoelscher 7630a80791
Change default ARM hardware PWM WS2812 tick frequency to 800kHz (#24508)
2024-10-27 23:29:43 -07:00
..
keymaps/default Remove all via-enabled keymaps, including via. (#24322) 2024-08-26 07:51:22 +10:00
config.h Change default ARM hardware PWM WS2812 tick frequency to 800kHz (#24508) 2024-10-27 23:29:43 -07:00
halconf.h [Keyboard] Add Mode Tempo PCB's (#22550) 2023-12-15 14:28:27 -07:00
keyboard.json Migrate build target markers to keyboard.json (#23293) 2024-03-30 11:31:50 +00:00
mcuconf.h [Keyboard] Add Mode Tempo PCB's (#22550) 2023-12-15 14:28:27 -07:00
readme.md [Keyboard] Add Mode Tempo PCB's (#22550) 2023-12-15 14:28:27 -07:00

readme.md

Mode Tempo M60H_F

Mode Tempo M60H_F

The following is the QMK Firmware for the Mode Tempo M60H_F PCB.

Make example for this keyboard (after setting up your build environment):

make mode/m60h_f:default

Flashing example for this keyboard:

make mode/m60h_f:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key ESC key and plug in the keyboard (Top Left most switch)
  • Keycode in layout: Press the key mapped to QK_BOOT if available
  • Physical Reset Button: Hold down the button on the back of the PCB