qmk_firmware/data/xap/xap_0.1.0.hjson
2022-05-26 18:22:54 +01:00

369 lines
14 KiB
Plaintext
Executable File
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

{
version: 0.1.0
uses: {
keycodes: 0.0.1
}
documentation: {
order: [
broadcast_messages
!broadcast_messages.md.j2
]
reserved_tokens:
'''
Two token values are reserved: `0x0000` and `0xFFFF`:
* `0x0000`: A message sent by a host application may use this token if no response is to be sent -- a "fire and forget" message.
* `0xFFFF`: Signifies a "broadcast" message sent by the firmware without prompting from the host application. Broadcast messages are defined later in this document.
Any request will generate at least one corresponding response, with the exception of messages using reserved tokens. Maximum total message length is 128 bytes due to RAM constraints.
'''
broadcast_messages:
'''
## Broadcast messages
Broadcast messages may be sent by the firmware to the host, without a corresponding inbound request. Each broadcast message uses the token `0xFFFF`, and does not expect a response from the host. Tokens are followed by an _ID_ signifying the type of broadcast, with corresponding _payload_.
'''
}
response_flags: {
bits: {
1: {
name: Secure Failure
define: SECURE_FAILURE
description:
'''
When this bit is set, the requested _route_ was marked _secure_ but an _unlock sequence_ has not completed.
'''
}
6: {
name: Unlocking
define: UNLOCK_IN_PROGRESS
description:
'''
When this bit is set, an _unlock sequence_ is in progress.
'''
}
7: {
name: Unlocked
define: UNLOCKED
description:
'''
When this bit is set, an _unlock sequence_ has completed, and _secure routes_ may be invoked.
'''
}
}
}
type_docs: {
u64:
'''
An unsigned 64-bit integral, commonly seen as `uint64_t` from _stdint.h_.
'''
"struct{}":
'''
A structure of data, packing different objects together. Data is "compacted" -- there are no padding bytes between fields. Equivalent to a packed C-style `struct`. The order in which they're defined matches the order of the data in the response packet.
'''
}
term_definitions: {
Capability:
'''
A way to determine if certain functionality is enabled in the firmware. Any _subsystem_ that provides build-time restriction of functionality must provide a _route_ for a _capabilities query_.
'''
"Secure Route":
'''
A _route_ which has potentially destructive consequences, necessitating prior approval by the user before executing.
'''
"Unlock sequence":
'''
A physical sequence initiated by the user to enable execution of _secure routes_.
'''
}
type_definitions: {
broadcast_header: {
name: Broadcast Header
description: Packet format for broadcast messages.
type: struct
struct_length: 4
struct_members: [
{
type: token
name: token
},
{
type: u8
name: type
},
{
type: u8
name: length
}
]
}
}
broadcast_messages: {
define_prefix: XAP_BROADCAST
messages: {
0x00: {
name: Log message
define: LOG_MESSAGE
description:
'''
Replicates and replaces the same functionality as if using the standard QMK `CONSOLE_ENABLE = yes` in `rules.mk`. Normal prints within the firmware will manifest as log messages broadcast to the host. `hid_listen` will not be functional with XAP enabled.
Log message payloads include a `u8` signifying the length of the text, followed by the `u8[Length]` containing the text itself.
**Example Log Broadcast** -- log message "Hello QMK!"
| Byte | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
| --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
| **Purpose** | Token | Token | Broadcast Type | Length | Payload | Payload | Payload | Payload | Payload | Payload | Payload | Payload | Payload | Payload |
| **Value** | `0xFF` | `0xFF` | `0x00` | `0x0A`(10) | `0x48`(H) | `0x65`(e) | `0x6C`(l) | `0x6C`(l) | `0x6F`(o) | `0x20`( ) | `0x51`(Q) | `0x4D`(M) | `0x4B`(K) | `0x21`(!) |
'''
}
0x01: {
name: Secure Status
define: SECURE_STATUS
description:
'''
Secure status has changed. Payloads include a `u8` matching a 'Secure Status' request.
**Example Secure Status Broadcast** -- secure "Unlocking"
| Byte | 0 | 1 | 2 | 3 |
| --- | --- | --- | --- | --- |
| **Purpose** | Token | Token | Broadcast Type | Secure Status |
| **Value** | `0xFF` | `0xFF` | `0x01` | `0x01` |
'''
return_type: u8
}
}
}
routes: {
0x00: {
routes: {
0x01: {
type: command
name: Capabilities Query
define: CAPABILITIES_QUERY
description:
'''
XAP subsystem capabilities query. Each bit should be considered as a "usable" route within this subsystem.
'''
return_type: u32
return_purpose: capabilities
return_constant: XAP_ROUTE_XAP_CAPABILITIES
}
0x02: {
type: command
name: Enabled subsystem query
define: SUBSYSTEM_QUERY
description:
'''
XAP protocol subsystem query. Each bit should be considered as a "usable" subsystem. For example, checking `(value & (1 << XAP_ROUTE_QMK) != 0)` means the QMK subsystem is enabled and available for querying.
'''
return_type: u32
return_purpose: capabilities
return_constant: XAP_ROUTE_CAPABILITIES
}
0x03: {
type: command
name: Secure Status
define: SECURE_STATUS
description:
'''
Query secure route status
* 0 means secure routes are disabled
* 1 means unlock sequence initiated but incomplete
* 2 means secure routes are allowed
* any other value should be interpreted as disabled
'''
permissions: ignore
return_type: u8
return_execute: secure_status
}
0x04: {
type: command
name: Secure Unlock
define: SECURE_UNLOCK
description: Initiate secure route unlock sequence
return_execute: secure_unlock
}
0x05: {
type: command
name: Secure Lock
define: SECURE_LOCK
permissions: ignore
description: Disable secure routes
return_execute: secure_lock
}
}
},
0x01: {
type: router
name: QMK
define: QMK
description:
'''
This subsystem is always present, and provides the ability to address QMK-specific functionality.
'''
routes: {
0x00: {
type: command
name: Version Query
define: VERSION_QUERY
description:
'''
QMK protocol version query.
* Returns the BCD-encoded version in the format of XX.YY.ZZZZ => `0xXXYYZZZZ`
* e.g. 3.2.115 will match `0x03020115`, or bytes {0x15,0x01,0x02,0x03}.
'''
return_type: u32
return_purpose: bcd-version
return_constant: QMK_BCD_VERSION
}
0x01: {
type: command
name: Capabilities Query
define: CAPABILITIES_QUERY
description:
'''
QMK subsystem capabilities query. Each bit should be considered as a "usable" route within this subsystem.
'''
return_type: u32
return_purpose: capabilities
return_constant: XAP_ROUTE_QMK_CAPABILITIES
}
0x02: {
type: command
name: Board identifiers
define: BOARD_IDENTIFIERS
description:
'''
Retrieves the set of identifying information for the board.
'''
return_type: struct
return_struct_length: 10
return_struct_members: [
{
type: u16
name: Vendor ID
},
{
type: u16
name: Product ID
},
{
type: u16
name: Product Version
},
{
type: u32
name: QMK Unique Identifier
}
]
return_constant: [
VENDOR_ID
PRODUCT_ID
DEVICE_VER
XAP_KEYBOARD_IDENTIFIER
]
}
0x03: {
type: command
name: Board Manufacturer
define: BOARD_MANUFACTURER
description: Retrieves the name of the manufacturer
return_type: string
return_constant: QSTR(MANUFACTURER)
}
0x04: {
type: command
name: Product Name
define: PRODUCT_NAME
description: Retrieves the product name
return_type: string
return_constant: QSTR(PRODUCT)
}
0x05: {
type: command
name: info.json length
define: INFO_LEN_QUERY
description: Retrieves the length of info.json
return_type: u32
return_constant: INFO_JSON_GZ_LEN
}
0x06: {
type: command
name: info.json
define: INFO_QUERY
description: Retrieves a chunk of info.json
request_type: u16
request_purpose: offset
return_type: u8[32]
return_execute: get_info_json_chunk
}
0x07: {
type: command
name: Jump to bootloader
define: BOOTLOADER_JUMP
permissions: secure
enable_if_preprocessor: defined(BOOTLOADER_JUMP_SUPPORTED)
description:
'''
Jump to bootloader
May not be present if QMK capabilities query returns “true”, then jump to bootloader is supported
* 0 means secure routes are disabled, and should be considered as a failure
* 1 means successful, board will jump to bootloader
'''
return_type: u8
return_execute: request_bootloader_jump
}
0x08: {
type: command
name: info.json
define: HARDWARE_ID
description: Retrieves a unique identifier for the board.
return_type: u32[4]
return_execute: get_hardware_id
}
}
},
0x02: {
type: router
name: Keyboard
define: KB
description:
'''
This subsystem is always present, and reserved for user-specific functionality. No routes are defined by XAP.
'''
routes: {
}
},
0x03: {
type: router
name: User
define: USER
description:
'''
This subsystem is always present, and reserved for user-specific functionality. No routes are defined by XAP.
'''
routes: {
}
}
}
}