qmk_firmware/keyboards/om60
Ryan 7e0299117b
Move encoder config to data driven (#19923)
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-02-26 09:45:12 +11:00
..
keymaps Remove legacy keycodes, part 6 (#18740) 2022-10-16 14:14:40 +01:00
config.h Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
info.json Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
matrix.c [Keyboard] Add om60 rev1 keyboard (#18126) 2022-09-24 00:38:43 -07:00
om60.c [Keyboard] Add om60 rev1 keyboard (#18126) 2022-09-24 00:38:43 -07:00
om60.h [Keyboard] Add om60 rev1 keyboard (#18126) 2022-09-24 00:38:43 -07:00
readme.md [Keyboard] Add om60 rev1 keyboard (#18126) 2022-09-24 00:38:43 -07:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

OM60

OM60

The 60% Poker compatible Ortholinear keyboard or jumbo Macropad.

Make example for this keyboard (after setting up your build environment):

make om60:default

Flashing example for this keyboard:

make om60:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available