mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-05 17:30:56 +00:00
ccb6c908dd
* Remove `SOFT_SERIAL_PIN` for non-split boards * Delete more empty config.h |
||
---|---|---|
.. | ||
keymaps/default | ||
info.json | ||
readme.md | ||
rules.mk |
CHORD ZERO Stenographic Keyboard
CHORD ZERO is a stenographic keyboard that can be used with Plover or any other application that supports the TX Bolt or GeminiPR protocol.
- Keyboard Maintainer: Simon Hengel
- Hardware Supported: REV 0, REV 1
- Hardware Availability: https://github.com/sol/chord-zero#readme
Make example for this keyboard (after setting up your build environment):
make chord/zero:default
or
qmk compile -kb chord/zero -km default
This will generate chord_zero_default.uf2
.
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Reset key combo: Press the six keys at the outer columns on each side of the keyboard simultaneously while it is plugged in
- Bootmagic reset: Hold down the top left key and plug in the keyboard
- Physical reset button: Press the button on the back of the PCB and plug in the keyboard
Once the keyboard is in bootloader mode you can mount it as a USB mass storage
device and copy the firmware (the file chord_zero_default.uf2
) onto it. Once
copying is completed the keyboard will reboot automatically.