mirror of
https://github.com/qmk/qmk_firmware.git
synced 2025-05-29 04:23:23 +00:00
36 lines
1.3 KiB
Markdown
36 lines
1.3 KiB
Markdown
# Aplusx Pulsar XBOARD QS
|
|
|
|
|
|
|
|
A 80% keyboard (/w 3 Special key, Encoder, USB Hub, switching 2 host function)
|
|
|
|
* Keyboard Maintainer: [skylupin03](https://github.com/skylupin03)
|
|
* Hardware Supported: Pulsar XBOARD QS
|
|
* Hardware Availability: [Pulsar] (https://pulsargg.kr/product/list.html?cate_no=24)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make aplusx_pulsar/xboard_qs:default
|
|
make aplusx_pulsar/xboard_qs:via
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make aplusx_pulsar/xboard_qs:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**:
|
|
1. Unplug USB Cable.
|
|
2. Hold the "u" key.
|
|
3. Plug in the USB Cable, the Keyboard should be in ST-Bootloader state.
|
|
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB
|
|
1. Unplug USB Cable.
|
|
2. Hold the Physical reset button.
|
|
3. Plug in the USB Cable, the Keyboard should be in ST-Bootloader state.
|
|
|
|
* **Keycode in layout**: Press the key mapped to the `QK_BOOT` if set by the user
|