gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-30 23:15:51 +00:00
Code Issues Packages Projects Releases Wiki Activity
6fbfd659ff
qmk_firmware/keyboards/dnworks/frltkl
History
Nick Brassel 45dc2499dc
Remove all via-enabled keymaps, including via. (#24322)
2024-08-26 07:51:22 +10:00
..
keymaps/default Remove all via-enabled keymaps, including via. (#24322) 2024-08-26 07:51:22 +10:00
config.h [Keyboard] Add dnworks frltkl (#21457) 2023-07-06 00:51:54 -06:00
keyboard.json Migrate build target markers to keyboard.json (#23293) 2024-03-30 11:31:50 +00:00
matrix_diagram.md dnworks FRLTKL Community Layout support (#21922) 2023-09-09 12:15:57 -07:00
readme.md [Keyboard] Add dnworks frltkl (#21457) 2023-07-06 00:51:54 -06:00

readme.md

FRLTKL

PCB that supports FRLTKLs designed by dnworks, such as DNDD and HITC.

  • Keyboard Maintainer: Zeix
  • Hardware Supported: DNDD Solder PCB rev1 & HITC Solder PCB rev1
  • Hardware Availability: dnworks.co

Make example for this keyboard (after setting up your build environment):

make dnworks/frltkl:default

Flashing example for this keyboard:

make dnworks/frltkl:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the RESET button twice or short the USB_BOOT and GND pads and plug in the keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available