gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-14 13:50:46 +00:00
Code Issues Packages Projects Releases Wiki Activity
6d232091db
qmk_firmware/keyboards/handwired/onekey/rp2040/readme.md
Stefan Kerkmann d717396708
[Core] Add Raspberry Pi RP2040 support (#14877) 
* Disable RESET keycode because of naming conflicts

* Add Pico SDK as submodule

* Add RP2040 build support to QMK

* Adjust USB endpoint structs for RP2040

* Add RP2040 bootloader and double-tap reset routine

* Add generic and pro micro RP2040 boards

* Add RP2040 onekey keyboard

* Add WS2812 PIO DMA enabled driver and documentation

Supports regular and open-drain output configuration. RP2040 GPIOs are
sadly not 5V tolerant, so this is a bit use-less or needs extra hardware
or you take the risk to fry your hardware.

* Adjust SIO Driver for RP2040

* Adjust I2C Driver for RP2040

* Adjust SPI Driver for RP2040

* Add PIO serial driver and documentation

* Add general RP2040 documentation

* Apply suggestions from code review

Co-authored-by: Nick Brassel <nick@tzarc.org>

Co-authored-by: Nick Brassel <nick@tzarc.org>
2022-06-30 13:19:27 +02:00

371 B
Raw Blame History

Raspberry Pi 2040 onekey

To trigger keypress, short together pins GP4 and GP5.

Double-tap reset to enter bootloader mode. Copy the built uf2 file to the device by dragging the file to the new USB disk.

Supported Hardware

  • Raspberry Pi Pico
  • SparkFun Pro Micro - RP2040
  • Adafruit KB2040 - RP2040 Kee Boar
  • ...and many more RP2040 based development boards