0
0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-18 07:33:26 +00:00
qmk_firmware/keyboards/sixkeyboard
2021-09-12 05:28:01 +00:00
..
keymaps Six Pack and ortho_ layout updates () 2021-07-19 17:30:09 -07:00
.noci Exclude more keyboards from CI () 2021-01-13 08:12:28 -08:00
config.h Change keyboard level include guards to pragma once () 2021-09-01 19:03:14 +10:00
info.json Remove width, height and key_count from info.json () 2021-09-12 14:04:56 +10:00
matrix.c Removes Erez personally from QMK () 2019-05-15 19:53:45 -04:00
readme.md Modified URLs to point to new locations 2019-01-13 09:11:18 -08:00
rules.mk Remove BLUETOOTH_ENABLE from keyboard-level rules.mk () 2021-09-12 15:27:29 +10:00
sixkeyboard.c Backlight abstraction and other changes () 2016-06-23 22:18:20 -04:00
sixkeyboard.h Change keyboard level include guards to pragma once () 2021-09-01 19:03:14 +10:00

Techkeys SixKeyBoard

Keyboard Maintainer: QMK Community
Hardware Supported: Techkeys SixKeyBoard PCB
Hardware Availability: Techkeys

Make example for this keyboard (after setting up your build environment):

make sixkeyboard:default

See build environment setup then the make instructions for more information.

Hardware Info

The schematic is like this:

 switches       leds
,--+--+--.   ,--+--+--.
|C7|B7|B5|   |C6|B6|B4|
+--+--+--+   +--+--+--+
|D6|D1|D4|   |D5|D2|D3|
`--+--+--'   `--+--+--'

The LED on the bottom is C4. All 7 of the leds are turned on when the keyboard boots-up in the sixkeyboard.c file - backlight_enable is not required. The MCU is an Atmega16u2, so the flash memory is limited to 0x3000 bytes - the current setup uses just about all of that! I'm sure things can be opitimised a bit.

There is a jumper on the bottom of the board (next to the USB port) that serves as a reset button - I drilled a hole in my case to allow for quick access via a screwdriver/metal object.