qmk_firmware/keyboards/dztech/dz60rgb_wkl
Ryan 6b74e48f81
Remove audio pin references in rules.mk (#14532)
2021-09-21 20:04:03 +10:00
..
keymaps [Keymap] Adding HHKB Keymap for dz60rgb_wkl:v2 (#11840) 2021-02-16 10:50:15 -05:00
v1 Remove audio pin references in rules.mk (#14532) 2021-09-21 20:04:03 +10:00
v2 Remove audio pin references in rules.mk (#14532) 2021-09-21 20:04:03 +10:00
v2_1 Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379) 2021-09-12 15:27:29 +10:00
config.h Tidy up dztech config.h 2019-12-18 10:23:26 +11:00
dz60rgb_wkl.c __flash? (#13799) 2021-07-31 14:35:30 +01:00
dz60rgb_wkl.h Tidy up dztech keyboard.c/h and readmes (#7664) 2020-01-14 08:49:31 +11:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
readme.md [Keyboard] adds new keyboard version: dztech/dz60rgb_wkl/v2_1 (#14021) 2021-08-19 16:51:23 +01:00

readme.md

DZ60RGB

dz60rgb

A hotswap 60% RGB keyboard.

  • Keyboard Maintainer: moyi4681
  • Hardware Supported: DZtech DZ60RGB-WKL V1 and V2
  • Hardware Availability: KBDfans

There are three versions of the DZ60RGB-WKL. Please use the appropriate firmware for your board.

  • V1: STM32F303 (Arm), takes .bin files
  • V2: ATmega32U4 (AVR), takes .hex files
  • V2.1: ATmega32U4 (AVR), takes .bin files Started shipping in June 2021 as a slightly modified version of v2.

Make example for this keyboard (after setting up your build environment):

make dztech/dz60rgb_wkl/v1:default # Arm (STM32F303)
make dztech/dz60rgb_wkl/v2:default # AVR (ATmega32U4)
make dztech/dz60rgb_wkl/v2_1:default # AVR (ATmega32U4)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.