mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-05 01:15:19 +00:00
1ccd0c19da
by 3araht
295 lines
9.7 KiB
C
295 lines
9.7 KiB
C
/*
|
|
Copyright 2020 3araht
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include "config_common.h"
|
|
|
|
/* key matrix size */
|
|
#define MATRIX_ROWS 12
|
|
#define MATRIX_COLS 10
|
|
|
|
/*
|
|
* Keyboard Matrix Assignments
|
|
*
|
|
* Change this to how you wired your keyboard
|
|
* COLS: AVR pins used for columns, left to right
|
|
* ROWS: AVR pins used for rows, top to bottom
|
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
|
*
|
|
*/
|
|
#define MATRIX_ROW_PINS { B5, B4, E6, D7, C6, D4 }
|
|
#define MATRIX_COL_PINS { B1, F7, F6, F5, F4, B3, B2, B6, D0, D1 }
|
|
#define MATRIX_ROW_PINS_RIGHT { D1, D0, D4, C6, D7, E6 }
|
|
#define MATRIX_COL_PINS_RIGHT { F4, F5, F6, F7, B1, B3, B2, C7, B7, F1 }
|
|
|
|
/* COL2ROW, ROW2COL */
|
|
#define DIODE_DIRECTION COL2ROW
|
|
|
|
/*
|
|
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
|
*/
|
|
#define SOFT_SERIAL_PIN D2
|
|
#define SELECT_SOFT_SERIAL_SPEED 1
|
|
/*Sets the protocol speed when using serial communication*/
|
|
//Speeds:
|
|
//0: about 189kbps (Experimental only)
|
|
//1: about 137kbps (default)
|
|
//2: about 75kbps
|
|
//3: about 39kbps
|
|
//4: about 26kbps
|
|
//5: about 20kbps
|
|
|
|
// Right side has to be the master since 1, LED data is output from right side, and 2, Audio pin is prepared on right side as a reserve.
|
|
#define MASTER_RIGHT
|
|
|
|
// for "Generic" Promicro to be detected correctly as lefthand side (slave)
|
|
#define SPLIT_USB_DETECT
|
|
|
|
//#define BACKLIGHT_PIN B7
|
|
//#define BACKLIGHT_LEVELS 3
|
|
//#define BACKLIGHT_BREATHING
|
|
|
|
/* ws2812 RGB LED */
|
|
#define RGB_DI_PIN D3
|
|
|
|
#ifdef RGBLIGHT_ENABLE
|
|
# define RGBLED_NUM 123
|
|
|
|
// Do not define "RGBLED_SPLIT" since somehow it doesn't work well yet.
|
|
// Even thhough "#define RGBLED_SPLIT { 60, 63 }" was set, LEDs on the sub keyboad side didn't turn on.
|
|
// Not sure but rgblight_sethsv_at() might not support RGBLED_SPLIT yet.
|
|
// Instead, LED data is tranferred from right side to the left via TRRS cable.
|
|
|
|
# define RGBLIGHT_LIMIT_VAL 80
|
|
# define RGBLIGHT_LAYERS
|
|
|
|
// By default, LEDs of the buttons which are pressed turn on.
|
|
// # define RGBLIGHT_EFFECT_TWINKLE
|
|
// # define RGBLIGHT_EFFECT_KNIGHT
|
|
|
|
|
|
// RGBLIGHT LED MAP
|
|
// Right 1st row (12 LEDs)
|
|
// ENCODER
|
|
// Right 2nd .. 5th row(13, 12, 13, 12 LEDs)
|
|
// Left 1st .. 5th row (12 LEDs x 5 rows)
|
|
|
|
# define RGBLIGHT_LED_MAP { \
|
|
60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, \
|
|
97, \
|
|
84, 83, 82, 81, 80, 79, 78, 77, 76, 75, 74, 73, 72, \
|
|
85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, \
|
|
110, 109, 108, 107, 106, 105, 104, 103, 102, 101, 100, 99, 98, \
|
|
111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, \
|
|
\
|
|
11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, \
|
|
12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, \
|
|
35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25, 24, \
|
|
36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \
|
|
59, 58, 57, 56, 55, 54, 53, 52, 51, 50, 49, 48 \
|
|
}
|
|
#endif
|
|
|
|
#ifdef RGB_MATRIX_ENABLE
|
|
/* ws2812 RGB MATRIX */
|
|
# define DRIVER_LED_TOTAL 123
|
|
# define RGB_MATRIX_KEYPRESSES // reacts to keypresses
|
|
|
|
// for all fingers used at once.
|
|
# define LED_HITS_TO_REMEMBER 10
|
|
|
|
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50
|
|
|
|
// the above brighness setting has no effect on rgb_matrix_set_color().
|
|
// Use darker colors instead.
|
|
/* RGB darker COLORS */
|
|
# define RGB_DARKWHITE 0x66, 0x66, 0x66
|
|
# define RGB_DARKRED 0x66, 0x0, 0x0
|
|
# define RGB_DARKCORAL 0x66, 0x31, 0x1E
|
|
# define RGB_DARKORANGE 0x66, 0x33, 0x0
|
|
# define RGB_DARKGOLDENROD 0x56, 0x42, 0xD
|
|
# define RGB_DARKGOLD 0x66, 0x56, 0x0
|
|
# define RGB_DARKYELLOW 0x66, 0x66, 0x0
|
|
# define RGB_DARKCHARTREUSE 0x33, 0x66, 0x0
|
|
# define RGB_DARKGREEN 0x0, 0x66, 0x0
|
|
# define RGB_DARKSPRINGGREEN 0x0, 0x66, 0x33
|
|
# define RGB_DARKTURQUOISE 0x1C, 0x2C, 0x2A
|
|
# define RGB_DARKTEAL 0x0, 0x33, 0x33
|
|
# define RGB_DARKCYAN 0x0, 0x66, 0x66
|
|
# define RGB_DARKAZURE 0x3D, 0x62, 0x66
|
|
# define RGB_DARKBLUE 0x0, 0x0, 0x66
|
|
# define RGB_DARKPURPLE 0x30, 0x0, 0x66
|
|
# define RGB_DARKMAGENTA 0x66, 0x0, 0x66
|
|
# define RGB_DARKPINK 0x66, 0x33, 0x4C
|
|
|
|
// https://docs.qmk.fm/#/feature_rgb_matrix
|
|
// Enable suspend mode.
|
|
// # define RGB_DISABLE_WHEN_USB_SUSPENDED true
|
|
|
|
# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
|
|
// #define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
|
|
// #define ENABLE_RGB_MATRIX_BREATHING
|
|
// #define ENABLE_RGB_MATRIX_BAND_SAT
|
|
// #define ENABLE_RGB_MATRIX_BAND_VAL
|
|
// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
|
|
// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
|
|
// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
|
|
// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
|
|
// #define ENABLE_RGB_MATRIX_CYCLE_ALL
|
|
// #define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
|
|
// #define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
|
|
# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
|
|
// #define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
|
|
// #define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
|
|
// #define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
|
|
// #define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
|
|
// #define ENABLE_RGB_MATRIX_DUAL_BEACON
|
|
// # define ENABLE_RGB_MATRIX_RAINBOW_BEACON
|
|
// #define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
|
|
// #define ENABLE_RGB_MATRIX_RAINDROPS
|
|
// #define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
|
|
# define ENABLE_RGB_MATRIX_HUE_BREATHING
|
|
// #define ENABLE_RGB_MATRIX_HUE_PENDULUM
|
|
// #define ENABLE_RGB_MATRIX_HUE_WAVE
|
|
// #define ENABLE_RGB_MATRIX_TYPING_HEATMAP
|
|
// #define ENABLE_RGB_MATRIX_DIGITAL_RAIN
|
|
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
|
|
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
|
|
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
|
|
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
|
|
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
|
|
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
|
|
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
|
|
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
|
|
// #define ENABLE_RGB_MATRIX_SPLASH
|
|
# define ENABLE_RGB_MATRIX_MULTISPLASH
|
|
// #define ENABLE_RGB_MATRIX_SOLID_SPLASH
|
|
// #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
|
|
#endif // RGB_MATRIX_ENABLE
|
|
|
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
|
#define DEBOUNCE 5
|
|
|
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
|
//#define MATRIX_HAS_GHOST
|
|
|
|
// /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
// #define LOCKING_SUPPORT_ENABLE
|
|
// /* Locking resynchronize hack */
|
|
// #define LOCKING_RESYNC_ENABLE
|
|
|
|
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
|
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
|
|
*/
|
|
//#define GRAVE_ESC_CTRL_OVERRIDE
|
|
|
|
/*
|
|
* Force NKRO
|
|
*
|
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
|
* makefile for this to work.)
|
|
*
|
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
|
* until the next keyboard reset.
|
|
*
|
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
|
* fully operational during normal computer usage.
|
|
*
|
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
|
* power-up.
|
|
*
|
|
*/
|
|
//#define FORCE_NKRO
|
|
|
|
/*
|
|
* Feature disable options
|
|
* These options are also useful to firmware size reduction.
|
|
*/
|
|
|
|
/* disable debug print */
|
|
//#define NO_DEBUG
|
|
|
|
/* disable print */
|
|
//#define NO_PRINT
|
|
|
|
/* disable action features */
|
|
//#define NO_ACTION_LAYER
|
|
//#define NO_ACTION_TAPPING
|
|
//#define NO_ACTION_ONESHOT
|
|
|
|
/* Bootmagic Lite key configuration */
|
|
//#define BOOTMAGIC_LITE_ROW 0
|
|
//#define BOOTMAGIC_LITE_COLUMN 0
|
|
|
|
/* Audio */
|
|
#ifdef AUDIO_ENABLE
|
|
# define AUDIO_PIN B5 // use EX1 = PB5 = PIN9 as Audio output
|
|
// #define DAC_SAMPLE_MAX 32768U
|
|
# define DAC_SAMPLE_MAX 65535U
|
|
// #define AUDIO_CLICKY
|
|
# define NO_MUSIC_MODE
|
|
// #define STARTUP_SONG SONG(FANTASIE_IMPROMPTU)
|
|
// #define STARTUP_SONG SONG(NOCTURNE_OP_9_NO_1)
|
|
// #define STARTUP_SONG SONG(USSR_ANTHEM)
|
|
// #define STARTUP_SONG SONG(CAMPANELLA)
|
|
#endif
|
|
|
|
/*
|
|
* MIDI options
|
|
*/
|
|
|
|
/* enable basic MIDI features:
|
|
- MIDI notes can be sent when in Music mode is on
|
|
*/
|
|
//#define MIDI_BASIC
|
|
|
|
/* enable advanced MIDI features:
|
|
- MIDI notes can be added to the keymap
|
|
- Octave shift and transpose
|
|
- Virtual sustain, portamento, and modulation wheel
|
|
- etc.
|
|
*/
|
|
#ifdef MIDI_ENABLE
|
|
# define MIDI_ADVANCED
|
|
// Initial velocity value (avoid using 127 since it is used as a special number in some sound sources.)
|
|
# define MIDI_INITIAL_VELOCITY 117
|
|
#endif // MIDI_ENABLE
|
|
|
|
/*
|
|
* Encoder options
|
|
*/
|
|
#ifdef ENCODER_ENABLE
|
|
# define ENCODERS_PAD_A { }
|
|
# define ENCODERS_PAD_B { }
|
|
# define ENCODER_RESOLUTIONS { }
|
|
# define ENCODERS_PAD_A_RIGHT { B4 }
|
|
# define ENCODERS_PAD_B_RIGHT { B6 }
|
|
# define ENCODER_RESOLUTIONS_RIGHT { 4 }
|
|
# define TAP_CODE_DELAY 10
|
|
#endif // ENCODER_ENABLE
|
|
|
|
/* 2021/01/22 added to shrink firmware size */
|
|
// NO_ACTION_TAPPING -1964 bytes, however, this disables Layer mods...
|
|
// #define NO_ACTION_TAPPING
|
|
// NO_ACTION_ONESHOT -388 bytes
|
|
#define NO_ACTION_ONESHOT
|