mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-30 15:05:50 +00:00
27f9f3196d
* add support for ymd75 rev3 * Update keyboards/ymd75/rev3/rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/ymd75/rev3/rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * remove DESCRIPTION * only apply offset for rev3 Co-authored-by: Ryan <fauxpark@gmail.com>
23 lines
1.1 KiB
Markdown
23 lines
1.1 KiB
Markdown
# YMD75 / MT84
|
|
|
|
75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.
|
|
|
|
* Keyboard Maintainer: [Wayne K Jones](github.com/WarmCatUK)
|
|
* Hardware Supported:
|
|
- rev1 (ATmega32a)
|
|
- rev2 (ATmega32a)
|
|
- rev3 (ATmega32u4)
|
|
* Hardware Availability: <https://www.aliexpress.com/item/32812690592.html>
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make ymd75/rev1:default
|
|
|
|
Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
|
|
|
|
make ymd75/rev1:default:flash
|
|
|
|
**Reset Key**: Hold down the key located at *Key below the top right key*, commonly programmed as *Backspace* while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding `L_CTRL` while plugging in the keyboard.
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|