qmk_firmware/keyboards/ymd75
Jakob 27f9f3196d
[Keyboard] add support for ymd75 rev3 (#10483)
* add support for ymd75 rev3

* Update keyboards/ymd75/rev3/rules.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/ymd75/rev3/rules.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

* remove DESCRIPTION

* only apply offset for rev3

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-10-04 15:19:34 -07:00
..
keymaps [Keyboard] add support for ymd75 rev3 (#10483) 2020-10-04 15:19:34 -07:00
rev1 [Keyboard] add support for ymd75 rev3 (#10483) 2020-10-04 15:19:34 -07:00
rev2 [Keyboard] add support for ymd75 rev3 (#10483) 2020-10-04 15:19:34 -07:00
rev3 [Keyboard] add support for ymd75 rev3 (#10483) 2020-10-04 15:19:34 -07:00
README.md [Keyboard] add support for ymd75 rev3 (#10483) 2020-10-04 15:19:34 -07:00
config.h [Keyboard] add support for ymd75 rev3 (#10483) 2020-10-04 15:19:34 -07:00
info.json [Keyboard] add support for ymd75 rev3 (#10483) 2020-10-04 15:19:34 -07:00
rules.mk YMD75: move MCU/Bootloader rules to revision level (#9452) 2020-06-18 00:15:22 -07:00
ymd75.c Add support for YMD75 rev 2 (#8853) 2020-04-20 00:58:58 +01:00
ymd75.h [Keyboard] add support for ymd75 rev3 (#10483) 2020-10-04 15:19:34 -07:00

README.md

YMD75 / MT84

75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.

Make example for this keyboard (after setting up your build environment):

make ymd75/rev1:default

Flashing example for this keyboard (after setting up the bootloadHID flashing environment)

make ymd75/rev1:default:flash

Reset Key: Hold down the key located at Key below the top right key, commonly programmed as Backspace while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding L_CTRL while plugging in the keyboard.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.