qmk_firmware/keyboards/rgbkb/zen/rev1/keymaps/xyverz/keymap.c
Ryan 5e4b076af3
Remove legacy keycodes, part 5 (#18710)
* `KC_SLCK` -> `KC_SCRL`
* `KC_NLCK` -> `KC_NUM`
2022-10-15 22:29:43 +01:00

173 lines
7.8 KiB
C

/* This is the Zen keyboard layout by Xyverz aka u/Zrevyx on r/mk.
This is pretty much a direct port of my Atreus62 keymap.
The bottom row is fairly Kinesis-ish since the Contour and Advantage
keyboards have been my daily drivers for the last 17 years. I hope
You can get some enjoyment out of this layout should you chose it!
CHANGELOG:
0.1 - Initial commit. Based off of Profet's default keymap.
TODO:
* Figure out how to make the bottom row work best for me.
* Add legends in comments for each layer. Maybe.
*/
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _DVORAK 0
#define _QWERTY 1
#define _COLEMAK 2
#define _WOW 3
#define _LOWER 4
#define _RAISE 5
#define _ADJUST 16
enum atreus52_keycodes {
DVORAK = SAFE_RANGE,
QWERTY,
COLEMAK,
WOW,
LOWER,
RAISE
};
// Aliases to make the keymap clearer.
#define CTLBSPC CTL_T(KC_BSPC) // CTRL when held, BSPC when tapped.
#define RGB_SWR RGB_M_SW // Swirl Animation alias
#define RGB_SNK RGB_M_SN // Snake Animation alias
#define ADJUST MO(_ADJUST)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_DVORAK] = LAYOUT( \
KC_RBRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, \
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, \
KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, \
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, \
LOWER, KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, KC_BSPC, KC_LGUI, KC_ENT, KC_SPC, KC_UP, KC_DOWN, KC_SLSH, KC_EQL, RAISE \
),
[_QWERTY] = LAYOUT( \
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL , \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \
LOWER, KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, KC_BSPC, KC_LGUI, KC_ENT, KC_SPC, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL, RAISE \
),
[_COLEMAK] = LAYOUT( \
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, \
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL , \
KC_CAPS, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \
LOWER, KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, KC_BSPC, KC_LGUI, KC_ENT, KC_SPC, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL, RAISE \
),
[_WOW] = LAYOUT( \
KC_RBRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, \
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, \
KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, \
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, \
LOWER, KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, CTLBSPC, KC_LALT, KC_ENT, KC_SPC, KC_UP, KC_DOWN, KC_SLSH, KC_EQL, RAISE \
),
[_LOWER] = LAYOUT( \
KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12 , \
KC_TILD, KC_GRV, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PIPE, \
KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, KC_PLUS, KC_LCBR, KC_RCBR, _______, \
_______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, KC_PSCR, KC_SCRL, KC_PAUS, _______, \
_______, _______, _______, KC_HOME, KC_END, KC_DEL, _______, _______, KC_INS, KC_PGUP, KC_PGDN, _______, _______, _______ \
),
[_RAISE] = LAYOUT( \
KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12 , \
KC_TILD, KC_GRV, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PIPE, \
KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, KC_EQL, KC_LBRC, KC_RBRC, _______, \
_______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, KC_PSCR, KC_SCRL, KC_PAUS, _______, \
_______, _______, _______, KC_HOME, KC_END, KC_DEL, _______, _______, KC_INS, KC_PGUP, KC_PGDN, _______, _______, _______ \
),
[_ADJUST] = LAYOUT( \
QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, RGB_M_P, RGB_M_B, RGB_M_R, RGB_SNK, _______, QWERTY, COLEMAK, DVORAK, WOW, _______, \
RGB_TOG, RGB_MOD, RGB_SWR, RGB_M_K, RGB_M_G, RGB_HUI, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
),
};
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
void matrix_init_user(void) {
// This will disable the red LEDs on the ProMicros
DDRD &= ~(1<<5);
PORTD &= ~(1<<5);
DDRB &= ~(1<<0);
PORTB &= ~(1<<0);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case DVORAK:
if (record->event.pressed) {
persistent_default_layer_set(1UL<<_DVORAK);
}
return false;
break;
case QWERTY:
if (record->event.pressed) {
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case COLEMAK:
if (record->event.pressed) {
persistent_default_layer_set(1UL<<_COLEMAK);
}
return false;
break;
case WOW:
if (record->event.pressed) {
persistent_default_layer_set(1UL<<_WOW);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
}
return true;
};