mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-14 22:00:53 +00:00

History

Ryan d8aec71e48 Remove trailing zeroes in info.json layouts (#20156 )		2023-03-17 14:21:53 +00:00
..
keymaps	Reworked backlight keycodes. (#18961 )	2022-11-06 08:11:59 +11:00
config.h	Move matrix config to info.json, part 3 (#19991 )	2023-03-11 00:34:34 +11:00
info.json	Remove trailing zeroes in info.json layouts (#20156 )	2023-03-17 14:21:53 +00:00
neito.h	[Keyboard] Neito + my DZ60 keymap tweaks (#11773 )	2021-07-16 09:39:35 -07:00
readme.md	[Keyboard] Neito + my DZ60 keymap tweaks (#11773 )	2021-07-16 09:39:35 -07:00
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00

readme.md

Neito

by Oliver Granlund

ISO-variant of TGR Alice with a few tweaks!

Keyboard Maintainer: Oliver Granlund
Hardware Supported: Neito PCB (ATmega32U4)
Hardware Availability: Group Buys hosted on https://olli.works

Getting the board into bootloader mode:

To be able to flash firmware onto this board, you'll need to bring the keyboard into bootloader mode. The keyboard has a debug-panel located between the keys "H" and "N". In this 2x3-panel, short the two pins which are furthest away from the atmega32u4 microcontroller. See the red arrows in the image below.

Make example for this keyboard (after setting up your build environment):

make neito:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.