qmk_firmware/keyboards/skyloong/gk104/q1/readme.md

GK980 Q1 Keyboard

The PCB features:

• QMK & VIA compatibility
• RGB Matrix backlight
• Use PTIR switches instead of mechanical switches to increase the service life and reliability of switches.

The following is the QMK Firmware for the Destop 87% keylayout - designed by Dongguan Jizhi Electronic Technology Co., Ltd

• Keyboard Maintainer: JZ-Skyloong
• Hardware Supported: DestopPCB for Skyloong keylayout 85%, STM32F103C8T6
• Hardware Availability: http://www.skyloong.com.cn https://skyloong.vip

Make example for this keyboard (after setting up your build environment):

make skyloong/gk980/q1:default

Flashing example for this keyboard:

make skyloong/gk980/q1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

• Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
• Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
• Keycode in layout: Press the key mapped to QK_BOOT if it is available