0
0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-14 13:50:46 +00:00
qmk_firmware/keyboards/plx
2023-02-17 16:08:25 +11:00
..
keymaps [Keyboard] PLX Refactor () 2021-10-14 17:00:08 -07:00
config.h Remove matrix size defines () 2023-02-17 16:08:25 +11:00
info.json Migrate MCU and BOOTLOADER to data-driven () 2023-02-08 18:41:46 +11:00
plx.c [Keyboard] Add PLX Keyboard () 2021-06-19 19:14:40 -07:00
plx.h [Keyboard] PLX Refactor () 2021-10-14 17:00:08 -07:00
readme.md [Keyboard] Add PLX Keyboard () 2021-06-19 19:14:40 -07:00
rules.mk Migrate MCU and BOOTLOADER to data-driven () 2023-02-08 18:41:46 +11:00

PLX

PLX

An 60% gasket mounted board with a Tsangan layout and a 7 degree typing angle.

  • Keyboard Maintainer: 2Moons
  • Hardware Supported: PLX PCB, ATMEGA32U4-AU
  • Hardware Availability: Website

Make example for this keyboard (after setting up your build environment):

make plx:default

To flash firmware onto this board, you'll need to bring the PCB into bootloader mode. To enter bootloader mode, press the reset button on the back of the PCB once. The reset button is located in the bottom near the space bar.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide

Build guide