gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-23 11:52:59 +00:00
Code Issues Packages Projects Releases Wiki Activity
54f441ca9f
qmk_firmware/keyboards/tzarc/ghoul
History
Ryan 81a6407dca
Update more DRIVER_LED_TOTAL defines to RGB_MATRIX_LED_COUNT (#19089)
2022-11-16 05:59:09 +11:00
..
graphics Add tzarc/ghoul. (#18562) 2022-10-03 07:24:22 +11:00
keymaps/default Normalise Space Cadet keycodes (#18864) 2022-10-27 11:19:16 +01:00
rev1 Add tzarc/ghoul. (#18562) 2022-10-03 07:24:22 +11:00
config.h Update more DRIVER_LED_TOTAL defines to RGB_MATRIX_LED_COUNT (#19089) 2022-11-16 05:59:09 +11:00
ghoul.c Add tzarc/ghoul. (#18562) 2022-10-03 07:24:22 +11:00
info.json Add tzarc/ghoul. (#18562) 2022-10-03 07:24:22 +11:00
readme.md Add tzarc/ghoul. (#18562) 2022-10-03 07:24:22 +11:00
rules.mk Add tzarc/ghoul. (#18562) 2022-10-03 07:24:22 +11:00

readme.md

Ghoul

Ghoul

Planck-like development board for QMK, using SparkFun MicroMod for hot-swap MCU capability.

  • Keyboard Maintainer: tzarc
  • Hardware Supported: Ghoul rev1 PCB + MicroMod STM32, MicroMod RP2040
  • Hardware Availability: Open-source

Make example for this keyboard (after setting up your build environment):

make tzarc/ghoul/rev1/stm32:default
make tzarc/ghoul/rev1/rp2040:default

Flashing example for this keyboard:

make tzarc/ghoul/rev1/stm32:default:flash
make tzarc/ghoul/rev1/rp2040:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top-left key (usually Escape) and plug in the keyboard
  • Physical reset button: Either press all 5 left-most keys on the bottom row, or hold BOOT and press RESET
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available