qmk_firmware/keyboards/takashicompany/qoolee
Ryan 5bd68e3695
Move single `LAYOUT`s to data driven (#20365)
2023-04-12 13:42:51 +10:00
..
keymaps Remove legacy international keycodes (#18588) 2022-10-09 14:51:09 +11:00
config.h Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
info.json Move single `LAYOUT`s to data driven (#20365) 2023-04-12 13:42:51 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

qoolee

qoolee

QooLee is a keyboard with a 30% layout with ISO Enter. It can also be equipped with a rotary encoder. It supports hot-swapping of keyswitches with MX sockets and mounting of LEDs. VIA (Remap) firmware is also available.

Make example for this keyboard (after setting up your build environment):

make takashicomoany/qoolee:default

Flashing example for this keyboard:

make takashicompany/qoolee:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available