qmk_firmware/keyboards/kmini
Drashna Jaelre b05c0e46c6 Adds a default value for IS_COMMAND for COMMAND feature (#4301)
* Add default value for IS_COMMAND for COMMAND feature

* Cleanup and consistency

* Update Templates to reflect change

* Fix IS_COMMAND in template

* Fix IS_COMMAND define

* Use consistent IS_COMMAND block in templates

* Remove unnecessary `#undef IS_COMMAND` directives

* Fix compile issue on orthodox

* Reomve IS_COMMAND option for newer boards

* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting

* Remove a couple of additional IS_COMMAND defines

* Remove remaining redundant IS_COMMAND definitions

* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin

* Remove multiple empty lines in modified config.h files

* Update additional boards

* Reomve IS_COMMAND from newer boards

* Update Alice keyboard

* Remove IS_COMMAND from additional boards

Jan 24th edition
2019-01-26 15:49:45 -08:00
..
keymaps/default Kmini refactor and Configurator support (#3388) 2018-07-12 16:30:53 -07:00
config.h Adds a default value for IS_COMMAND for COMMAND feature (#4301) 2019-01-26 15:49:45 -08:00
info.json Kmini refactor and Configurator support (#3388) 2018-07-12 16:30:53 -07:00
kmini.c Add kmini (#3386) 2018-07-12 12:42:36 -07:00
kmini.h Add kmini (#3386) 2018-07-12 12:42:36 -07:00
matrix.c Kmini refactor and Configurator support (#3388) 2018-07-12 16:30:53 -07:00
readme.md Add kmini (#3386) 2018-07-12 12:42:36 -07:00
rules.mk Add kmini (#3386) 2018-07-12 12:42:36 -07:00

readme.md

Kmini keyboard firmware

The Revo Kmini is a 65% keyboard with an additional two columns on the left. It is programmed with the 'KMAC key map', which only works on Windows and according to a user it cannot map media controls or change the capslock key.

Hardware

Columns 0, 1 and 10-16 and rows 0-4 are wired directly to the ATmega32u4, and columns 2-9 are wired to the 74HC237D demultiplexer. Capslock is on E2 and also triggers a reset if held when plugging the cable in. There are three possible places for leds, which are the capslock key and the two keys above the right arrow key. All three of them are individually controllable. The ATmega32u4 runs on an external crystal on 8mhz, so you'll have to change the bitclock on the ISP programmer if you're unable to read or write the chip.

How to build

Please read the documentation.

How to flash

Hold the capslock key while plugging in the USB and flash the .hex file using QMK Toolbox or Atmel FLIP.