gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-22 11:29:26 +00:00
Code Issues Packages Projects Releases Wiki Activity
530e044762
qmk_firmware/keyboards/plywrks/ply8x
History
Nick Brassel 45dc2499dc
Remove all via-enabled keymaps, including via. (#24322)
2024-08-26 07:51:22 +10:00
..
keymaps/default Remove all via-enabled keymaps, including via. (#24322) 2024-08-26 07:51:22 +10:00
config.h Migrate RGB Matrix config to info.json - NOPQ (#22866) 2024-01-10 09:55:09 +00:00
halconf.h [Keyboard] Add Plywrks ply8x (#21263) 2023-07-03 03:49:43 -07:00
keyboard.json Migrate build target markers to keyboard.json (#23293) 2024-03-30 11:31:50 +00:00
mcuconf.h [Keyboard] Add Plywrks ply8x (#21263) 2023-07-03 03:49:43 -07:00
readme.md [Keyboard] Add Plywrks ply8x (#21263) 2023-07-03 03:49:43 -07:00

readme.md

Plywrks ply8x

ply8x

F12 coreless keyboard PCB.

  • Keyboard Maintainer: Ramon Imbao
  • Hardware Supported: STM32F072

Make example for this keyboard (after setting up your build environment):

make plywrks/ply8x:default

Flashing example for this keyboard:

make plywrks/ply8x:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Set the slide switch to BOOTLOADER, then briefly press the button on the back of the PCB.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available