qmk_firmware/keyboards/matrix/m12og/rev1
2022-05-15 20:26:27 +01:00
..
boards/m12og_v1 Add Matrix 8XV1.2 OG rev1 PCB (#11614) 2021-06-11 20:35:13 +10:00
keymaps/default RESET -> QK_BOOT default keymaps (#17037) 2022-05-15 20:26:27 +01:00
ld Add Matrix 8XV1.2 OG rev1 PCB (#11614) 2021-06-11 20:35:13 +10:00
chconf.h Add Matrix 8XV1.2 OG rev1 PCB (#11614) 2021-06-11 20:35:13 +10:00
config.h Add Matrix 8XV1.2 OG rev1 PCB (#11614) 2021-06-11 20:35:13 +10:00
halconf.h Add Matrix 8XV1.2 OG rev1 PCB (#11614) 2021-06-11 20:35:13 +10:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
matrix.c Add Matrix 8XV1.2 OG rev1 PCB (#11614) 2021-06-11 20:35:13 +10:00
mcuconf.h Add Matrix 8XV1.2 OG rev1 PCB (#11614) 2021-06-11 20:35:13 +10:00
readme.md Add Matrix 8XV1.2 OG rev1 PCB (#11614) 2021-06-11 20:35:13 +10:00
rev1.c Fixup bootloaders. (#16256) 2022-02-06 19:09:21 -08:00
rev1.h Add Matrix 8XV1.2 OG rev1 PCB (#11614) 2021-06-11 20:35:13 +10:00
rules.mk Fixup bootloaders. (#16256) 2022-02-06 19:09:21 -08:00

Matrix 8XV1.2 OG keyboard

Matrix 8XV1.2 OG

This was the Matrix 8XV1.2 OG keyboard made by the Matrix team.
Note: This firmware only supports ANSI only version (green/yellow PCB), and DOES NOT support the 8XV1.2 OG ISO/ANSI version.

  • Keyboard Maintainer: kb-elmo
  • Hardware Supported: Matrix 8XV1.2 OG ANSI only PCB
  • Hardware Availability: Matrix Lab

Make example for this keyboard (after setting up your build environment):

make matrix/m12og/rev1:default

Bootloader:

Hold down ESC while plugging in the keyboard. The board will show up as a mass storage device on your computer. Drag and drop the compiled firmware .bin file into it. The board will automatically reset and load the new firmware.

DO NOT DO THIS ON A MAC OS SYSTEM! IT WILL PERMANENTLY BRICK THE KEYBOARD!!!


See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.