mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-23 03:42:59 +00:00
777a6e0e58
* Added keyboard rena * format file info.json * modify info.json file * modify 16mhz to 8mhz * modify info.json file * Delete redundant Spaces * Delete redundant Spaces * Delete redundant Spaces * Delete redundant Spaces --------- Co-authored-by: “yuezp” <“yuezpchn@126.com”>
27 lines
1.0 KiB
Markdown
27 lines
1.0 KiB
Markdown
# Rena - PCB
|
|
|
|
![Rena](https://i.imgur.com/95rqwegh.jpg)
|
|
|
|
A 59 keys keyboard with rgb.
|
|
This keyboard use 8mhz HSE and STM32F103 as MCU.
|
|
|
|
* Keyboard Maintainer: https://github.com/LXF-YZP
|
|
* Hardware Supported: Rena PCB
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make meetlab/rena:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make meetlab/rena:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |