gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-25 12:46:41 +00:00
Code Issues Packages Projects Releases Wiki Activity
49a1a12a32
qmk_firmware/keyboards/4pplet/eagle_viper_rep/rev_a
History
Ryan 28b6a8841f
Add 60_ansi_tsangan_split_bs_rshift to community layouts (#24186)
2024-09-02 09:13:28 +10:00
..
keymaps/default Remove all via-enabled keymaps, including via. (#24322) 2024-08-26 07:51:22 +10:00
chconf.h Adding "Eagle Viper Rep", open sourced Eagle/Viper V2/V3 PCB (#13020) 2021-06-22 08:09:16 +10:00
config.h Data-Driven Keyboard Conversions: 0-9 (#23357) 2024-03-30 13:51:57 +00:00
halconf.h Adding "Eagle Viper Rep", open sourced Eagle/Viper V2/V3 PCB (#13020) 2021-06-22 08:09:16 +10:00
keyboard.json Add 60_ansi_tsangan_split_bs_rshift to community layouts (#24186) 2024-09-02 09:13:28 +10:00
matrix_diagram.md 4pplet Eagle/Viper Rep Rev.A Layout Additions II (#22161) 2023-09-29 00:30:59 -07:00
mcuconf.h Adding "Eagle Viper Rep", open sourced Eagle/Viper V2/V3 PCB (#13020) 2021-06-22 08:09:16 +10:00
readme.md Adding "Eagle Viper Rep", open sourced Eagle/Viper V2/V3 PCB (#13020) 2021-06-22 08:09:16 +10:00
rev_a.c Update GPIO API usage in keyboard code (#23361) 2024-05-03 15:21:29 +10:00
rev_a.h 4pplet/eagle_viper_rep/rev_a Layout Macro Conversion and Additions (#20414) 2023-04-12 14:29:29 -07:00
rules.mk Data-Driven Keyboard Conversions: 0-9 (#23357) 2024-03-30 13:51:57 +00:00

readme.md

Viper/Eagle REP Rev A

A alternative PCB for Viper and Eagle V2 and V3

  • Keyboard Maintainer: 4pplet
  • Hardware Supported: Viper/Eagle REP Rev A

Make example for this keyboard (after setting up your build environment):

make 4pplet/eagle_viper_rep/rev_a:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

  • Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
  • Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.

Alternative option if the firmware is already pre-flashed:

  • Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.