gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-23 03:42:59 +00:00
Code Issues Packages Projects Releases Wiki Activity
4852b04c20
qmk_firmware/keyboards/primekb/meridian
History
Ryan 1184e0d9be
Adjust keycode alignment around QK_BOOT (#23697)
2024-05-11 16:50:48 +01:00
..
keymaps Adjust keycode alignment around QK_BOOT (#23697) 2024-05-11 16:50:48 +01:00
ktr1010 Migrate build target markers to keyboard.json (#23293) 2024-03-30 11:31:50 +00:00
ws2812 Migrate build target markers to keyboard.json (#23293) 2024-03-30 11:31:50 +00:00
chconf.h ChibiOS conf migrations... take 11 (#11646) 2021-01-21 17:00:53 +11:00
config.h Simplify more feature driver defines (#22090) 2023-09-25 13:06:42 +10:00
halconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
info.json Migrate features and LTO from rules.mk to data driven (#23307) 2024-03-30 10:57:30 +00:00
mcuconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
meridian.c Update GPIO API usage in keyboard code (#23361) 2024-05-03 15:21:29 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate features and LTO from rules.mk to data driven (#23307) 2024-03-30 10:57:30 +00:00

readme.md

ai03 x PrimeKB Meridian

Meridian

Compiling firmware and flashing

Enter bootloader

The DFU state in the bootloader can be accessed in 3 ways:

  • Bootmagic reset: hold down the key at (0,0) in the matrix (usually Escape) and plug in the keyboard; or
  • Physical reset button: press the button on the bottom of the PCB; or
  • Keycode in layout: press the key mapped to QK_BOOT if it is available (Escape key on layer 1 in the default layout).

Compile firmware

The Meridian PCB was delivered in two variants, equal in design but using different RGB LED models: one using WS2812 and another using KTR1010 LEDs. Both can be compiled using

make primekb/meridian/ws1812:default
make primekb/meridian/ktr1010:default

After compiling, enter bootloader in the PCB and flash the firmware using dfu-util or QMK Toolbox. For direct compile-and-flashing, put the PCB in DFU state and use

make primekb/meridian/ws1812:default:flash
make primekb/meridian/ktr1010:default:flash

VIA-supported firmwares are also available.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.